T&R 750ADM-H mk2 PCITS
Includes: T&R 750ADM-H mk2 Operating manual, mains lead, spare fuse set and carrying strap.
- done HTTPS SECURE: Our pages are encrypted and protected from cyber-attack.
- done COMPLIANT: Payment Card Industry Data Security Standard (PCI DSS) Compliant.
- done PROTECTED: by TLS (SSL) - all data/information is secure from interception.
The T&R 750ADM mk2 is a flexible current injection system capable of supplying currents of up to 750A ac into a variety of loads. The unit is designed for testing devices used for power system protection, but can be used wherever a high current AC source is required. The 750ADMH mk2 has a maximum no load output voltage of 5V. The unit is ideally suited to all low power primary injection tasks requiring up to 750A for short periods.
The unit has two outputs, allowing injection of currents as low as a few hundred milliamps and up to 750A. Voltages up to 16V are available on the 40A output, allowing higher impedance trips to be tested. Four true RMS metering ranges are provided, allowing the full scale of the meter and trip level to be set independently of the selected output.
Primary injection up to 750A.
16V 40A output for secondary injection.
True RMS memory ammeter with singlecycle capture.
Multi-function timing system.
Large back-lit liquid crystal display.
Thermal and over-current protection.
Automatic switch-off at end of test.
Compact and portable.
Automatic mains voltage selection*.
* See specifications.
|115 V||230 V|
|750 A Output||Open Circuit Voltage||3.5 V||5.0 V|
|Voltage at 500A||2.8 V||4 V|
|Continuous Current||125 A||125 A|
|5 Min On||250 A||250 A|
|1 Min On||440 A||500 A|
|Max Current||500 A||750 A|
|Max Current On Time||10 s||20 s|
|40 A Output||Open Circuit Voltage||10 V||16 V|
|Full Load Voltage||7.5 V||10 V|
|Continuous Current||10 A||10 A|
|1 Min On||40 A||40 A|
|20.00 A||0.01 A||21 A||±0.5%rdg+5d.|
|50.00 A||0.01 A||53 A||±0.5%rdg+5d.|
|200.0 A||0.1 A||210 A||±0.5%rdg+5d.|
|750 A||1 A||788 A||±0.5%rdg+2d.|
|Accuracy||±0.01%rdg+2d (all modes except current operated)
±0.01%rdg+4d (current operated mode).
|Supply Requirements (self selecting)||115V±10% 50/60Hz 1ph, 1900 VA max
230V±10%, 50/60 Hz 1ph, 3900 VA max.
|Storage Temperature||-20°C to 60°C.|
|Operating Temperature||0°C to 45°C.|
|Dimensions||560 x 456 x 265 mm.|
|T&R 750ADM-H mk2 warranty||One-year.|
No customer reviews for the moment.
|3m Leads||3m output leads.||A200-0001|
|1.5m Leads||1.5m output leads.||A200-0002|
|3m Leads||3m output leads with grey case.||A200-1001|
|1.5m Leads||1.5m output leads with grey case.||A200-1002|
|Printer Kit||Suitable for DVS3, PCU1-LT/SP, DSM/DMO and ADM range of test sets.||210|