loading spinner

test instrument calibration


CALIBRATION OFFICES IN THREE COUNTRIES


The Cuthbertson Laird Group provide a nationwide calibration and repair service, offering UKAS and National Traceable certification, both in the laboratory and 'on-site', which includes traceable results to national standards, detailed certification (including results) and full guarantees on all work.

Calibrations are undertaken in temperature controlled environments utilising state-of-the-art testing and calibration equipment. We are an authorised repair centre for most of the major instrument manufactureres including Megger Products, Megger Sweden (Programma), Fluke, Seaward, Druck and T&R.

As components age and equipment undergoes changes in temperature or sustains mechanical stress, critical performance gradually degrades. This is called drift. When this happens your test results become unreliable and both design and production quality suffer. Whilst drift cannot be eliminated, it can be detected and contained through the process of calibration.

ABOUT US

As a group we can calibrate and certify electrical, temperature, flue gas analysers, pressure, HVAC, airflow, torque, dimensional instruments and thermal imaging cameras. Our Metrology division can calibrate, repair and recondition a wide range of vernier gauges, micrometers, surface tables and gauge blocks.

ENGLAND

In our Leeds Calibration Lab we use state-of-the-art calibrators from Fluke, Chauvin Arnoux and Transmille. We are able to calibrate a wide range of 18th edition testers, handheld and bench multimeters, oscilloscopes and scopeMeter test tools, wattmeters, analog volt/ohm/amp/watt instruments, electronic thermometers, data loggers, strip chart recorders, XY Recorders, power harmonics analysers, process calibrators and current clamps. We offer competive calibration prices and a quick turnaround.

SCOTLAND

In Hamilton, Scotland, our expertise in test instrument calibration has been developed and honed since we were established in February 1980. During that time we have calibrated literally millions of test meters, from small single-function electrical testers to complex, high voltage test systems. Due to our geographical location, we are the number one company for calibration in Scotland.

Our highly experienced Hamilton Calibration Lab can calibrate up to UKAS standard the following:

Engineers Squares.
Precision spirit levels.
Micrometers , External, Internal & Depth.
Length Gauges Flat and Spherical ended (Setting Rods).
Vernier Gauges, Caliper Height & Depth.
Electronics indicators.
Dial Gauges both Plunger and Lever (All Types).
Plain Parallel Plug Gauges.
Electronic & Vernier Calipers.
Feeler gauges.
Individual & sets of gauges Pins etc.
Gauge Blocks both Metric & Imperial.

N. IRELAND & EIRE

Our Belfast Calibration Lab, based in Mallusk, Newtownabbey, can offer sales, repair, calibration and hire of test and measurement equipment, manufactured by all the major brands, including Megger, Seaward, Fluke, FLIR, GMI, HVI, GE Druck, T&R, Martindale, and many more. We offer a calibration service that covers the entire island of Ireland, both north and south.

With an ever-growing list of top-notch clients using our calibration services, the calibration department has seen a period of unprecedented growth over the last few years. With the recruitment of extra, quality staff we have been able to keep on top of this growth and maintain the speedy turnaround times on calibration that we have become known for.

ACCREDITATION

Our Calibration Certificates are traceable to National Standards including UKAS. We have facilities for the calibration of Electrical, Temperature, Pressure, HVAC, Safety, Airflow, Torque and Dimensional Metrology test & measurement equipment. Our quality system is BSI registered: BS EN ISO 9001:2015, Certificate No. FS 20815 and our calibration lab is UKAS No. 0316 (Hamilton Office) to BS EN ISO 17025: 2005.

Electronic versions in PDF format can be viewed by clicking on the links on the right-hand side. Adobe Reader is required to view PDF files on-screen. Download it for free here.

AUTHORISED REPAIR CENTRE

instrument repair in Hamilton

We hold 'Approved Repair Centre' status from many of the leading instrument manufacturers and all instruments are repaired to manufacturers' standards using approved parts.

We are an Approved Service Company for Testo, in accordance with Testo Limited’s terms and conditions, to carry out servicing and calibration for the Testo range of Domestic Flue Gas Analysers (T310, T320, T325, T327 & T330). We are also a Megger Authorised Service Centre and a GE Druck Silver Channel Partner.

ONSITE CALIBRATION

Reduce downtime and increase efficiency for your business with our On-site Calibration service. To save on time and administration we can call at your site with technicians and all the necessary equipment. We will then calibrate and certify all your instruments in one go. Due to our long-established reputation and proven expertise, we have built-up an unrivaled client list in the oil and fisheries industries in Scotland.

DIGITAL CERTIFICATES

We can offer you the option of an 'electronic copy' of the calibration certificate, which is downloadable from our website direct to any PC, tablet or mobile phone. If requested, we'll set you up with a unique login and ID that will allow you to download and print any of your test equipment calibration certificates held on our server.

Many of our customers are requesting this service instead of having to take paper copies on site. One company, whose engineers do a lot of work abroad, said carrying 'hard copies' of test certificates when on site was becoming a problem. Hard copies of the certificates will still need to be kept in a safe place and produced for inspections etc.

CLG CALIBRATION LINKS
Instrument Make & Model >>
Calibration In Hamilton >>
Calibration In Leeds >>
Calibration In Belfast >>
Calibration Login >>

Cuthbertson Laird Group (Scotland)
Parkburn Court
Hamilton
ML3 0QQ
Phone: 01698-829-711
Fax: 01698-828-363
Email: hamilton[at]cuthbertsonlaird.co.uk


Cuthbertson Laird Group (England)
Oaktree House

408 Oakwood Lane
Leeds
LS8 3LG
Telephone: 0113-235-1356

FAX:
Email: leeds[at]cuthbertsonlaird.co.uk


Cuthbertson Laird Group (Ireland)
Unit 4 River Park
Blackwater Road, Mallusk
Newtownabbey
BT36 4TZ
Telephone: 02890-830-302
Fax: 02890-838-866
Email: belfast[at]cuthbertsonlaird.co.uk


Quick Calibration Form







 

arrow_upward