- Hamilton01698 829711
- Leeds0113 235 1356
- Belfast02890 830302
Megger EZ-THUMP4 c/w 15 ft Cables
Includes: 6ft (1.8m) mains supply lead set, Universal battery charger kit, 15 ft (4.6 m) HV output and ground cables and EZ-Thump4 Instruction manual.
Order an EZ-Thump configured to your specific needs. To determine the catalog number, fill in the alpha characters with the corresponding numbers from the detailed options. Example: to order a 4-kV EZ-Thump with 15 ft output and ground cables, 14 mm male MC with vise grip cable termination, hand cart and sheath, request catalog number EZT4 - 15 T2 C H.
The Megger EZ-Thump (originally manufactured as the Seba EZ-Thump) is the compact and light weight, battery or mains powered solution for the fault location in MV or LV cables. It presents the ideal supplement for a satellite-based concept in areas of lower distribution density and failure rate, where fast reaction, weight, size and economy are the driving factors. The system requires no adjustments and need only to be operated by a rotary encoder.
Due to their rugged yet portable enclosure, they are ideally suited either for use in a “satellite” fault locating concept for remote areas that may have less frequent faults, when ease of operation, light weight and economics are important, or for hard to access inner city locations.
On-board is a TDR with a 7.6 km range and arc reflection at 4 kV for pre-locating. For pinpointing, EZ-Thump offers a surge energy of 500 J, d.c. testing for breakdown detection and insulation resistance measurement. The units are operated from line or the internal battery. They can fit in the boot of a car, making them ideal for a flexible quick response fault finding strategy.
FEATURES
Compact, light and rugged field instruments.
Battery and AC line operation.
Automatic end-of-cable and fault locating.
4 kV or 12 kV output versions available.
Transflective colour display.
ARM® prelocation.
Fault pinpointing (Thumping).
Optional sectionalizing software.
Testing | ||
Output | 0 - 4 kV, 35 mA DC (EZ-THUMP4) 0-12 kV, 12 mA DC (EZ-THUMP12). |
|
Prelocation | ||
TDR | Range: 25000 ft (7.6 km) Sampling Rate: 100 MHz Resolution: 2.5 ft @ 250 ft/fs 0.8 m @ 80 m / fs. |
|
Arc Reflection | 0 - 4 kV or 0 - 12 kV (model dependent). | |
Pinpoint Fault Location | ||
Surge | 0 - 4 kV @ 500 J (EZT4) 0 - 12 kV @ 500 J (EZT12). |
|
Impulse Sequence | 10 seconds Single shot. |
|
Display | ||
Type | 5.7" (14.48 cm) transflective TFT Colour LCD - 640 x 480 pixels. | |
Memory | ||
Trace Number | 1000. | |
Interface | ||
Port Type | USB. | |
Cables/Terminations | ||
Types | 15 ft (4.6 m) HV flexible shielded cable with MC connector and hotline clamp HV return with hotline clamp 15 ft (4.6 m) ground/earth cable with hotline clamp 6 ft (1.8 m) mains supply lead set (US/SCHUKO/UK). |
|
Supply | ||
Battery | Internal 24 V NiMH battery 5AH approx 30 mins or surge/thumping approx 3 hours recharge time 100-240 V AC - 24 V DC charger with connection lead set (US/SCHUKO/UK). |
|
AC Line | 100 - 230V AC ± 50/60 Hz. | |
Safety | ||
Functions | Emergency stop Key switch interlock Auto time out. |
|
General Specifications | ||
Operating Temperature | -4 to 122°F (-20 to +50°C). | |
Storage Temperature | -12 to 160°F (-25 to +70°C). | |
Rating | IP54. | |
Weight | 71lbs (32 kgs). | |
Dimensions | 14 x 11 x 21" (35.5 x 28 x 53.3 cm). | |
Megger EZ-Thump4 V2 warranty | One-year. |
No customer reviews for the moment.
COMPONENT | DESCRIPTION | PART No. | ||
15ft Leads | 15ft leads option. | EZTC15 | ||
50ft Leads | 50ft leads option. | EZTC50 | ||
Cart Kit | Hand cart prep kit. | EZTOC | ||
Wheel Kit | 'Wheel Kit' permanent cart attachment option. | EZTOWK | ||
Cart | Hand cart for EZ-Thump units. | 895000180110000 |