- Hamilton01698 829711
- Leeds0113 235 1356
- Belfast02890 830302
Fluke i400 AC Current Clamp
Fluke i400 AC current clamps extend the use of digital multimeters. Get a single range 400 A AC clamp in a compact shape.
The Fluke i400 AC Current Clamp is a high-safety current clamp for digital multimeters. The current clamp provides accurate current measurements without breaking electric circuits, helping you take measurements safely with industry standard safety ratings.
FEATURES
Companion to your DMM to measure up to 400 A AC.
1 mA/Amp output guarantees easy reading on you meter.
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating.
Specially designed to offer maximum utility in a very compact shape.
Take accurate current readings without breaking the circuit.
Soft non-slippery overmold handle prevents from accidental touching live wiring.
Max. conductor Ø 32 mm.
Nominal current range | 400 A. |
Continuous current range | 1 A - 400 A. |
Maximum non-destructive current | 1000 A. |
Lowest measurable current | 1 A. |
Basic accuracy | 2% + 0.06 A. |
(45-400 Hz). | |
(% reading + floorspec). | |
Useable frequency | 5 Hz - 20 kHz. |
Output level(s) | 1 mA/A. |
Safety Specifications | |
Safety | CAT IV 600 V, CAT III, 1000 V. |
Maximum voltage | 1000 V AC rms from earth to ground, in compliance with EN61010. |
Mechanical and General Specifications | |
Fluke i400 warranty | 1 year. |
Maximum conductor diameter | 32 mm (1.25 in). |
Maximum conductor size (busbar) | 750 MCM. |
Output cable length | 1.5 m (59 in). |
Shrouded banana plugs | Yes. |
No customer reviews for the moment.