The Fluke 789 ProcessMeter with a Fluke ir3000 FC Connector brings your favorite meter into the Fluke Connect family of test tools.
Warning: Last items in stock!
Use the Fluke 789 ProcessMeter™ with the ir3000 FC Connector to be in two places at once – source changing 4-20 mA signals at the control system while verifying control system responses remotely.
The Fluke 789 ProcessMeter is a handheld, battery-operated tool for measuring electrical parameters, supplying steady or ramping current to test process instruments, and providing a > 24 V loop power supply.
The Fluke 789 is the ultimate troubleshooting tool for electricians and instrumentation professionals, combining the functionality of a loop calibrator with the power of a digital multimeter. And with its built-in, selectable 250 ohm HART resistor, it eliminates the need to carry a separate resistor with you.
DMM and loop calibrator in one tool.
24 V Loop power supply
Very large dual display
Enhanced backlight with 2 brightness settings
1200 ohm drive capability on mA source
HART mode setting with loop power and a built-in 250 ohm resistor
0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check
Infrared-port to process data in FlukeView Forms (V2.1) software
Externally accessible battery for easy battery changes.
1000V overload protection on V, ohms, frequency.
150V overload protection on mA, backed up by 440 mA 1000V fuse.
25% Manual Step plus Auto Step and Auto Ramp on mA output.
Fluke 789 Specifications:
Includes: TL71 test lead set, AC72 alligator clips, batteries, Fluke 789 user manual & quick user guide.