The Fluke 9150 calibrator furnace was designed for portability, low cost, and ease of operation.
Warning: Last items in stock!
The Fluke 9150 thermocouple furnace can be used for calibrating thermocouple and RTD temperature probes. Calibrations may be done over a range of 150°C to 1200°C (302°F to 2192°F). Temperature display of the 9150 is 0.1 degrees below 1000° and 1 degrees above 1000°.
The temperature is accurately controlled by Fluke’s hybrid analog/digital controller. The controller uses a Type S thermocouple as a sensor and controls the well temperature with a solid state relay (triac) driven heater.
The LED front panel continuously shows the current well temperature. The temperature may be easily set with the control buttons to any desired temperature within the specified range. The calibrator’s multiple fault protection de-vices insure user and instrument safety and protection.
With interchangeable temperature blocks, you can check thermocouples as small as 1/16 of an inch in diameter. The Fluke 9150 works with 115 or 230 VAC power.
Rapid heating and cooling.
Interchangeable multiple hole probe sleeves.
Temperature scan rate control.
Eight set-point memory.
Adjustable readout in °C or °F.
|Temperature Range||150 °C to 1200 °C
(302 °F to 2192 °F)
|Display Resolution||0.1 ° to 999.9 °
1 ° above 1000 °
|Display Accuracy||±5 °C|
|Well Diameter||1.25 in (32 mm)|
|Well Depth||140 mm (5.5 in); (101 mm [4 in] removable insert plus 38 mm [1.5 in] insulator)|
|Heating Time||35 minutes to 1200 °C|
|Cooling Time||140 minutes with block|
|Well-to-Well Uniformity||±2.5 °C (Insert “C" at 1200 °C)|
|Power||115 V AC (±10 %), 10.5 A or 230 V AC (±10 %), 5.2 A, switchable, 50/60 Hz, 1200 W|
|Size (HxWxD)||315 mm x 208 mm x 315 mm
(12.4 in x 8.2 in x 12.4 in)
|Weight||13 kg (28 lb.)|
|NIST-Traceable Calibration||Data at 150 °C, 300 °C, 450 °C, 600 °C, 800 °C, 1000 °C, and 1200 °C|
|Fluke 9150 warranty||1 year|
Includes: Fluke 9150 Thermocouple Furnace, Insert A, B, C, D or none - as specified, Interface-IT software and RS-232 cable, NIST Traceable Calibration Certificate.