loading spinner
ETI 3101 Dry Well Sub Zero Calibrator
  • ETI 3101 Dry Well Sub Zero Calibrator
  • ETI 3101 Dry Well Sub Zero Calibrator

ETI 3101 Dry Well Sub Zero Calibrator

ETI Approved distributor

Includes: ETI 3101 dry-well, two removeable brass inserts (of the customers choice), traceable calibration certificate and user manual.

271-401
ETI LTD

Please note these units are built to order. Please choose required inserts (x2) before adding to cart.

The ETI 3101 dry-well is a high accuracy portable heat source that is extremely easy to use. Simply plug in, switch on and set the dry-well to the temperature that you wish to check, insert your probe into the correct size well and take the reading. Compare the temperature reading of your thermometer and probe to the displayed temperature of the dry-well and the difference is the error of your instrument.

The unit incorporates two removable wells/inserts, both Ø13 mm in diameter and will accept probe sizes Ø3.3, 4.1, 4.8, 6.4 and 9.6 mm. Each 3101 is supplied with two inserts of the customer's choice.

The 3101 dry-well is controlled by a closed loop microprocessor based digital PID temperature controller system incorporating a combination heater/cooler and a precision platinum RTD sensor housed in the aluminium block. Fan cooling allows rapid changes in well temperature upon demand. The required temperature may be adjusted in 0.1 °C increments across the range of the instrument using the buttons on the front panel.

FEATURES

Range: -10 to 110 °C (at 20 °C ambient).
Accepts a wide variety of probe diameters.
Ideal for checking accuracy of thermometers.
Built to order.
AC mains powered.
Case material: metal.
Country of manufacture: United Kingdom.

ETI 3101 Dry-Well Specifications
Range -10 to 110°C.
Resolution 0.1 °C.
Accuracy ±0.5°C (-10 to 99.9°C) ±1°C (100 to 110°C).
Cooling Time Ambient to 0°C after 10 minutes.
Well Depth 100 mm.
Heating Time Ambient to 100°C after 10 minutes.
Power Source 12 to 24 volt DC* (from supplied 230/115 volt AC power adapter).
Display LED digital.
Measurement Scale Celsius.
Case Material Metal.
Dimensions 100 x 153 x 186 mm.
Weight 180 grams.
ETI 3101 warranty 2 years.

Download

ETI 3101 Dry-Well Manual

PDF Operating manual for the ETI 3101 Dry Well Calibrator.

Download (589.13k)

No customer reviews for the moment.

Write your review

ETI 3101 Dry Well Sub Zero Calibrator
COMPONENT PARTS DESCRIPTION PART No.
3.3 mm Insert 3.3 mm ID brass insert for the 3101 calibrator. 271-321
4.1 mm Insert 4.1 mm ID brass insert for the 3101 calibrator. 271-322
4.8 mm Insert 4.8 mm ID brass insert for the 3101 calibrator. 271-323
6.4 mm Insert 6.4 mm ID brass insert for the 3101 calibrator. 271-324
9.6 mm Insert 9.6 mm ID brass insert for the 3101 calibrator. 271-325

16 other products in the same category:

arrow_upward