- Hamilton01698 829711
- Leeds0113 235 1356
- Belfast02890 830302
Martindale NC2 Non-contact Voltage Tester
Includes: 2 x 1.5V AAA alkaline batteries and instruction manual.
The Martindale NC2 is a non-contact voltage tester for accurately detecting the presence of AC voltages between 200V and 1000V. When voltages are detected, a bright red LED illuminates the clear tip of the NC2 and a buzzer sounds.
It will indicate approximately 4mm from a conductor at 240V AC, making it ideal for tracing live circuits within cable containment and for voltage detection in sockets and junction boxes. The NC2 can be used to differentiate between Live and Neutral wires and detect blown fuses.
The pen-shaped design with clip makes it ideal for carrying in a pocket or tool belt when working at height or in difficult to access locations. A built-in torch in the tip is ideal for use in low light areas illuminating the area under test. Other NC2 features include low battery indication and LED pulse when on.
The NC2 replaces the Martindale VT2.
FEATURES
Optimised for 230V single and 3 phase supplies.
Audible and visual indication from 200V to 1000V AC.
Extended probe for easy access.
Clear tip for high visibility indication.
LED torch for use in low light.
Power on LED pulse and low battery indicator.
NC1 | NC2 | NC3 | NC4 | |
---|---|---|---|---|
AC Voltage Range | 200-1000V | 200-1000V | 12-1000V 50V-1000V | |
Frequency Range | 40-400Hz | 40-400Hz | 40-400Hz | |
Magnetic Field Detection | >10mT | > 10mT | ||
LED Indication | Yellow LED | Red LED | Yellow / Red LED | Red LED |
Audible Indication | ✔ | ✔ | ✔ | ✔ |
Power On Pulse LED | ✔ | ✔ | ✔ | ✔ |
Low Battery Indication | ✔ | ✔ | ✔ | ✔ |
Auto Power Off | ✔ | ✔ | ✔ | |
LED Torch | ✔ | ✔ | ✔ | ✔ |
Electrical | |
---|---|
Maximum voltage | 1000V AC rms. |
Voltage sensitivity range | 200 to 1000V AC rms. |
Frequency range | 40 to 400Hz. |
Environmental | |
Temperature (Operating and Storage) | 0°C to 40°C. |
Humidity (Operating and Storage) | ≤80% RH. |
Altitude | Up to 2000m. |
Safety | |
Conforms to | BS EN 61010-1:2010 CAT IV 1000V Class II, Double insulation. |
IP Rating | IP40 to BS EN 60529. |
EMC | Conforms to BS EN61326-1. |
General Specifications | |
Power | 2 x 1.5V AAA alkaline batteries (IEC LR03, NEDA 24A). |
Current Consumption | 34 mA max. |
Dimensions | 158(L) x 20(W) x 27(D). |
Weight | 55g. |
Martindale NC2 warranty | Two-years. |
No customer reviews for the moment.