loading spinner

Drummond MTL15 Test Lamp

martindale approved distributor

Includes: 2x straight prods, 2x long straight prods, 1x long angled prod, 1x L-shaped prod and MTL15 instructions.

DRUMTL10
£99.00
Tax excluded
Quantity
  • done HTTPS SECURE: Our pages are encrypted and protected from cyber-attack.
  • done COMPLIANT: Payment Card Industry Data Security Standard (PCI DSS) Compliant.
  • done PROTECTED: by TLS (SSL) - all data/information is secure from interception.

The John Drummond MTL15 has a maximum working voltage of 1000V DC/AC rms and extended nominal voltage threshold indications of 50, 230, 400, 690C DC/AC rms. The CAT IV 1000V safety rating makes the MTL15 suitable for supply side applications in all installation categories as defined in BS EN 61010.

The robust design meets the recommendations of the Health and Safety Executive in their guidance notes on the electrician’s test lamp (GS38) as well as complying with the most recent changes to the voltage detector standard BS EN 61243-3 and the test equipment safety standard BS EN 61010.

Both the lamp housing and the probe have a finger shield and insulated probe tip with only 4mm of exposed metal. A two layer double insulated cable with white inner insulation gives a clear warning of abrasion that could compromise the user’s safety, and is resistant against heat and oil. The MTL Series of test lamps do not require batteries and have no ranges or switches to get wrong, ensuring reliable indication of hazardous voltages.

The MTL15 is supplied with six interchangeable test probes for safe and easy measurement in all types of application particularly where access is restricted. In addition to the standard 62mm straight and right angled probe, extended 130mm probes are included. For maximum ease of use, the right angled probes can be rotated through 90, 180 and 270 degrees and locked in position.

High intensity LEDs show four distinct bands of illumination for the different voltage thresholds up to 690V. The unique design provides a 360° viewing angle, even in bright sunlight. This allows reliable identification of potentially lethal voltages above 50V and enables the user to easily distinguish source voltages of different supply types.

FEATURES

AC and DC Voltage tests up to 1000V.
Bright LED indication.
Full voltage indication function without batteries.
PTC thermistor fitted in probe to limit current in the event of cable damage.
Contrasting colour of inner sheath to highlight cable damage.
Ergonomic and robust housing.
Probe tips comply with GS38.
Measurement Category CAT IV 1000V.
Constructed in compliance with BS EN 61243-3:2014.
IP64 rated environmental protection for internal electronics.

Drummond MTL15 Specifications
Electrical
Maximum working voltage 1000 V AC/DC.
Nominal voltage threshold indications 50, 230, 400, 690 V AC/DC.
Nominal voltage threshold tolerance Conforms to BS EN 61243-3:2014.
Internal impedance at ELV a.c. 30 kΩ.
Power Works with no battery.
Range detection. Automatic.
Response time <0.1s.
Frequency range DC, 40 - 65 Hz.
Test current <3.5mA at 1000 V AC/DC.
Duty ratio 30s ON (operated) / 240s OFF (recovery)
Environmental
Temperature (Operating & Storage) -10°C to 55°C.
Humidity (Operating & Storage) ≤ 85% R.H
Safety
Pollution degree 2.
Conforms BS EN 61243-3:2014 CAT IV 1000V.
IP Rating IP64.
Probe tips GS38.
EMC Conforms to BS EN 61326-1.
General Specifications
Power from circuit under test.
Dimensions  213(L) x 112(W) x 72(D) mm.
Weight (packed) 320g approx.
Drummond MTL15 warranty 2 years.

Download

Drummond MTL15 Datasheet

PDF Specifications of the Drummond MTL15 Test Lamp.

Download (47.46k)

No customer reviews for the moment.

Write your review

Drummond MTL15 Test Lamp

16 other products in the same category:

arrow_upward