- Hamilton01698 829711
- Leeds0113 235 1356
- Belfast02890 830302
Fluke 5611T-X Secondary Reference Thermistor Probe
Includes: Teflon Probe, 3.2 mm dia x 28 mm (0.12 in x 1.1 in), 0 °C to 100 °C, Lead wire length (Cable) 20 ft.
Specify “A" (INFO-CON for 914X), “B" (bare wire), “D" (5-pin DIN for Tweener Thermometers), “G" (gold pins), “I" (INFO-CON for 1521 or 1522), “J" (banana plugs), “L" (mini spade lugs), “M" (mini banana plugs), “P" (INFO-CON for 1523 or 1524), or “S" (spade lugs).
All models come without calibration unless calibration is purchased separately.
The Fluke 5611T-X is an especially versatile PTFE coated thermistor probe. With a PTFE encapsulated tip that is just 3 mm (0.12 in) in diameter and a PTFE coating that makes it impervious to most liquids, the PTFE Probe is handy for measuring in a wide variety of applications, including bio-pharmaceuticals. It's even immersible to nearly 20 feet and flexible enough that you could roll it up into a ball in your hand if you wanted to!
The 5611T's thermistor bead is encapsulated in a Mylar sleeve that is encapsulated inside a PTFE sleeve. The PTFE sleeve is then melted around the PTFE-insulated cable, forming a moisture-proof seal.
FEATURES:Teflon Probe, 3.2 mm dia x 28 mm (0.12 in x 1.1 in), 0 °C to 100 °C, Lead wire length (Cable) 20 ft.
Accredited NVLAP calibration optional.
Resistance | Nominal 10,000 Ω at 25 °C. |
Range | 0 °C to 100 °C. |
Calibration | R vs. T table with 0.1 °C increments, interpolation equation furnished. |
Calibration Uncertainty | Table and equation are accurate to ± 0.01 °C Optional accredited† calibration uncertainties ± 0.006 °C. |
Drift | Better than ± 0.01 °C per year (k=3). |
Repeatability | Better than ± 0.005 °C. |
Termination | Specify when ordering. |
†NVLAP Lab Code 200348-0 |
No customer reviews for the moment.