The Megger PAT150 includes the facility for mains powered leakage test. This test has the benefit that equipment under test will function during the test sequence.
The EasyPat1600 (EPAT1600) is an entry level 'legal minimum' tester which does all the required tests.
The Megger LTW425 series instruments offers a high resolution 2-wire loop testing solution that does not trip 30 mA RCDs and can be used on a wide range of voltages.
The Fluke 1587 FC Insulation Multimeter is the single tool that allows users to perform advanced insulation testing for preventive and PdM tasks.
The Fluke 705 Loop Calibrator is a cost-effective, integrated solution for calibration, repair and maintenance of current loops.
Features of the MIT430/2 include insulation tests at 50 V, 100 V, 250 V, 500 V and 1000 V + Polarisation Index, Dielectric Absorption Ratio, Variable Test Voltage and Bluetooth download.
The MI 3121H Smartec 2.5 kV Insulation / Continuity is the portable measuring instrument for complete diagnostic testing of insulation and continuity measurements.
The Fluke 2042 cable locator is a portable measurement instrument that can be used to detect or trace conductors.
The Metrohm E1622 Milliohm meter uses a four wire system to ensure accurate low resistance measurements.
The simple, intuitive interface means you can measure pressure, velocity, or airflow with the Fluke 922 at the push of a button.
The Megger DET3TC offers a complete kit for customers wishing to conduct earth electrode testing using the 2 and 3 pole techniques.
The Megger TDR500/3 is a hand held, compact, low cost entry level Time Domain Reflectometer for locating faults on metallic cables.
The Cropico DO4000 is a handheld digital Micro ohmmeter used to measure low resistance between 10 micro ohms to 4 kilo ohms.
The Seaward KD1E is a portable AC/DC neon indicator with domed contact electrode for use on systems up to 11kV
The Testo 477 can be used in many areas of industry, research & development, in laboratories and universities.
The RTD sensor of the 'Stik' Thermometer is housed in a rugged stainless steel sheath - you no longer have to worry about breaking a mercury-in-glass thermometer and the subsequent clean up.
The Genny4 is used to actively apply a locate signal to pipes or cables. This signal can be traced using the C.A.T4 locator in either Avoidance Mode or Genny mode.
The Fluke 700G 27 is a portable, high-quality round pressure gauge calibrator for fast and accurate calibration test results.
The Fluke 700G 05 portable, high-quality round pressure gauge calibrator for fast and accurate calibration test results.
The Fluke 700G 06 is a portable, high-quality round pressure gauge calibrator for fast and accurate calibration test results.