Druck UNIK 5000 Pressure Sensor
Using the Druck UNIK5000 product configurator (click on the image) select your sensor. At the end of the process you will be given the correct Part No: to order.
Our pages are encrypted and protected from cyber-attack.
Payment Card Industry Data Security Standard (PCI DSS) Compliant.
TLS (SSL) - all data/information is secure from interception.
The GE Druck UNIK5000 pressure sensor combines proven silicon technology and analogue circuitry with modular design and lean manufacturing techniques to create a pressure measurement, product range available at short lead times. The modular concept of the UNIK 5000 pressure sensor platform allows GE Sensing to create 1000s of individual sensors quickly and at an economical price.
The Druck UNIK 5000 pressure sensing platform is a high performance configurable solution to pressure measurement. The use of Druck silicon technology and analogue circuitry enables best in class performance for stability, lower power and frequency response. The use of modular design and lean manufacturing techniques allow users to design the product required to their unique application requirement.
Three grades of performance: Industrial (+/-0.2% FS BSL), Improved (+/- 0.1% FS BSL) and Premium (+/- 0.04% FS BSL).
UNIK 5000 configured sensors can be built for most with operating temperature ranges from -55 °C to +125 °C.
IP (Nema 4) ratings - including up to permanent full submersion in both water and hydrocarbons.
Configured options for intrinsically safe, and explosion-proof/flameproof, mining and marine certifications.
Excellent, reliable and cost effective performance in the most hazardous environments.
With broad pressure range operation from 70 mbar (1psi) to 700 bar (10,000 psi).
UNIK 5000 configured sensors can be built for most environments.
UNIK 5000 has multiple options: voltage, millivolts, and milliamps.
|Operating Pressure Ranges|
|Gauge Ranges||Any zero based range 70 mbar to 70 bar (1 to 1000 psi)
Note: All psi values are approximate.
|Sealed Gauge Ranges||Any zero based range 10 to 700 bar (145 to 10000 psi).|
|Absolute Ranges||Any zero based range 100 mbar to 700 bar (1.5 to 10000 psi).|
Uni-directional or bi-directional 70 mbar to 35 bar (1 to 500 psi)Wet/Wet
Uni-directional or bi-directional 350 mbar to 35 bar (5 to 500 psi)
Line pressure: 70 bar (1000 psi) maximum.
|Barometric Ranges||Barometric ranges are available with a minimum span of 350 mbar (5.1 psi).|
|Non-Zero Based Ranges||Non-zero based ranges are available. For non-zero based gauge ranges, please contact us to discuss your requirements.|
|Over Pressure||10 × FS for ranges up to 150 mbar (2 psi)
6 × FS for ranges up to 700 mbar (10 psi)
2 × FS for barometric ranges
4 × FS for all other ranges (up to 200 bar for ranges ≤70 bar and up to 1200 bar for ranges >70 bar)*
For differential versions the negative side must not exceed the positive side by more than:
6 × FS for ranges up to 150 mbar (2 psi)
4 × FS for ranges up to 700 mbar (10 psi)
2 × FS for all other ranges up to a maximum of 15 bar (200 psi).
|Containment Pressure||Ranges up to 150 mbar (2 psi) gauge 10 x FS
Ranges up to 70 bar (1000 psi) gauge 6 x FS(200 bar (2900 psi) max)
Ranges up to 70 bar (1000 psi) absolute 200 bar (2900 psi)
Ranges above 70 bar (1000 psi)
1200 bar (17400 psi)*
Differential (-ve port) must not exceed positive port by more than 6 × FS (15 bar (200 psi) maximum.
|* 600 bar (8700 psi) for pressure connector options PX, RA and RF.|
|Power-Up Time||mV, Voltage and current versions: 10 ms
Configurable 3-wire and 4-wire versions: 500 ms.
|Insulation||500 Vdc: 100 MΩ
500 Vac: < 5 mA leakage current (mV and mA versions only).
|There are three grades of performance specification: Industrial, Improved and Premium.|
|Voltage, Current and mV Linearised||Combined effects of non-linearity, hysteresis and repeatability:
Industrial: ±0.2% FS BSL
Improved: ±0.1% FS BSL
Premium: ±0.04% FS BSL.
|mV Passive||≤ 70 bar
Industrial/Improved: ±0.25% FS BSL
Premium not available
> 70 bar
Industrial/Improved: ±0.5% FS BSL
Premium not available.
|Zero Offset and Span Setting||Demountable electrical connector options allow access to potentiometers that give at least ±5% FS adjustment (see Electrical Connector section of datasheet).|
|Long Term Stability||±0.05% FS typical (±0.1% FS maximum) per year increasing pro-rata for pressure ranges below 350 mbar.|
|Pressure Media||Fluids compatible with stainless steel 316L and Hastelloy C276.
For the wet/dry differential version, negative pressure port: Fluids compatible with stainless steel 316L, stainless steel 304, Pyrex, silicon and structural adhesive.
|Enclosure Materials||Stainless steel (body), nitrile or silicone-rubber (o-rings, gaskets), EPDM (gaskets), PVDF (depth cone), PTFE (vent filter), Nickel plated brass (lock rings), glass filled nylon (electrical connector assemblies), delrin (depth cone). Cable sheaths as specified (see Electrical Connector).|
|Electrical Connector||Various electrical connector options are available offering different features.|
No customer reviews for the moment.