Drummond G-Clamp Connection Kit 2
Drummond Connection Kit 2 - Set of four G Clamps, black, brown, grey fused and blue unfused and 4m heavy duty colour coded CATIV test leads.
- done HTTPS SECURE: Our pages are encrypted and protected from cyber-attack.
- done COMPLIANT: Payment Card Industry Data Security Standard (PCI DSS) Compliant.
- done PROTECTED: by TLS (SSL) - all data/information is secure from interception.
NB: Suitable for rectangular bus bar ONLY. Not suitable for round conductor.
The Drummond G Clamp makes connecting to bus bars straight forward. The clamp-on design eliminates the need to drill bus bars and makes for a much safer, reliable connection via a standard 4 mm socket. The G Clamp can be tightened by hand when wearing PPE gloves, eliminating the need to use tools in the bus bar chamber.
Ideal for connecting power monitoring and measuring equipment, the new colour coded clamps make phase identification easy. The insulated materials reduce the hazard to the operator and the spring loaded contact pin and locking ring ensure reliable results throughout extended logging periods.
The Drummond G-Clamp Connection Kit 2 includes a set of four G clamps in black, brown, grey (all fused) and blue (unfused) with 4m heavy duty colour coded CATIV test leads. The leads are terminated with 45 degree 4mm safety plugs at both ends. The smaller barrel of the unfused design requires 25mm less clearance in front of the bus bar.
For enhanced safety, the fuse is fully recessed inside the fuse holder until the fuse holder is withdrawn.
Brown, Black, Grey and Blue G-Clamps.
Heavy duty colour coded CATIV test leads.
Can be tightened by hand when wearing PPE.
The clamp-on facility eliminates the need to drill the bus bar.
The insulated materials reduce the risk to the installer.
|Applied electrical contact force||40N +/- 5N.|
|Maximum working voltage||600 V AC.|
|Maximum working current||10 A.|
|Suitable for rectangular bus bar ONLY. Not suitable for round conductor.|
|Minimum Bar width||20 mm.|
|Minimum bar thickness||4 mm.|
|Maximum bar thickness||26 mm.|
|Operating temperature||-15°C to 60°C ≤ 80% R.H.|
|Storage temperature||-15°C to 60°C ≤ 80% R.H.|
|Materials||Nylon 66, reinforced with 13% glass fibre.|
|Safety||Conforms to BS EN61010.|
|Installation Overvoltage Rating||CAT IV 600V.|
|Fuse||6.35 x 32 mm 600V 0.5A HBC.|
|Length behind bus bar||12 mm.|
|Length in front of bus bar||61mm (+ 35mm as minimum allowance for 4mm plug).|
|Height above top of bus bar||14mm.|
|Width||50mm for locking ring nut.|
No customer reviews for the moment.