loading spinner
  • Reduced price
Fluke 434-ll PQ Analyser
  • Fluke 434-ll PQ Analyser
  • Fluke 434-ll PQ Analyser
  • Fluke 434-ll PQ Analyser

Fluke 434 Series II PQ Analyser

Fluke authorised distributor and calibration house.

Includes: BC430 Power Adapter, International plug adapter set, BP290 (Single capacity Li-ion battery) 28 Wh (7 hours or more), TL430 Test lead and Alligator clip set, WC100 color coding clips and regional decals, i430flex-TF, 24 inch (61 cm) length, 4 clamps, 8 GB SD card, PowerLog on CD (includes Fluke 435 Series II operator manuals in PDF format), USB cable A-Bmini, C1740 Soft Case.

4116638
£4,294.00
£4,079.30 Save 5%
Tax excluded
Quantity
  • done HTTPS SECURE: Our pages are encrypted and protected from cyber-attack.
  • done COMPLIANT: Payment Card Industry Data Security Standard (PCI DSS) Compliant.
  • done PROTECTED: by TLS (SSL) - all data/information is secure from interception.

The Fluke 434 II Energy Analyser is the ideal tool for energy logging. Utilising the new Energy Loss Calculator function, the 434 II measures the fiscal cost of energy wasted due to poor power quality.

This energy monetisation capability allows you to identify the most energy-wasteful areas of your facility so you can determine potential energy saving solutions. Add basic power quality measurements to the package and you’re got yourself one powerful troubleshooting tool.

Each Fluke power quality product includes powerful application software that enables you to change measurement data into valuable reports that can be shared with key stakeholders to develop solutions. Each software package includes reporting tools that create valuable insights in to the performance of your electrical system.

FEATURES

Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance.
Measure all three phases and neutral: With included four flexible current probes with enhanced thin flex designed to fit into the tightest places.
Automatic Trending: Every measurement is always automatically recorded, without any set-up.
System-Monitor: Ten power quality parameters on one screen according to EN50160 power quality standard.
Logger function: Configure for any test condition with memory for up to 600 parameters at user defined intervals.
View graphs and generate reports: With included analysis software.
Battery life: Up to 8 hours operating time per charge on Li-ion battery pack.
Wireless data download: Download data to PC wirelessly and capture screens using Fluke Connect App.

Fluke 430 Series II Video

Fluke 434 Series ll Specifications
Product Specifications
Volt Model Measurement Range Resolution Accuracy
Vrms (AC + DC) 1 V to 1000 V phase to neutral 0.1 V ±0.5% of nominal voltage4
Vpk 1 Vpk to 1400 Vpk 1 V 5% of nominal voltage.
Voltage Crest Factor (CF) 1.0 > 2.8 0.01 ±5%.
Vrms½ 1 V to 1000 V phase to neutral 0.1 V ±1% of nominal voltage.
Vfund 1 V to 1000 V phase to neutral 0.1 V ±0.5% of nominal voltage.
Amps (accuracy excluding clamp accuracy)
Amps (AC + DC) i430-Flex 1x 5 A to 6000 A 1 A ±0.5% ±5 counts.
i430-Flex 10x 0.5 A to 600 A 0.1 A ±0.5% ±5 counts.
1 mV/A 1x 5 A to 2000 A 1 A ±0.5% ±5 counts.
1 mV/A 10x 0.5 A A to 200 A (AC only) 0.1 A ±0.5% ±5 counts.
Apk i430-Flex 8400 Apk 1 Arms ±5%.
1 mV/A 5500 Apk 1 Arms ±5%.
A Crest Factor (CF) 1 to 10 0.01 ±5%.
Amps½ i430-Flex 1x 5 A to 6000 A 1 A ±1% ±10 counts.
i430-Flex 10x 0.5 A to 600 A 0.1 A ±1% ±10 counts.
1 mV/A 1x 5 A to 2000 A 1 A ±1% ±10 counts.
1 mV/A 10x 0.5 A A to 200 A (AC only) 0.1 A ±1% ±10 counts.
Afund i430-Flex 1x 5 A to 6000 A 1 A ±0.5% ±5 counts.
i430-Flex 10x 0.5 A to 600 A 0.1 A ±0.5% ±5 counts.
1 mV/A 1x 5 A to 2000 A 1 A ±0.5% ±5 counts.
1 mV/A 10x 0.5 A A to 200 A (AC only) 0.1 A ±0.5% ±5 counts.
Hz
Fluke 434 @ 50 Hz nominal 42.50 Hz to 57.50 Hz 0.01 Hz ±0.01 Hz.
Fluke 434 @ 60 Hz nominal 51.00 Hz to 69.00 Hz 0.01 Hz ±0.01 Hz.
Power
Watts (VA, var) i430-Flex max 6000 MW 0.1 W to 1 MW ±1% ±10 count
1 mV/A max 2000 MW 0.1 W to 1 MW ±1% ±10 count
Power Factor (Cos j/DPF) 0 to 1 0.001 ±0.1% @ nominal load condition
Energy
kWh (kVAh, kvarh) i430-Flex 10x Depends on clamp scaling and V nominal ±1% ±10 count.
Energy Loss i430-Flex 10x Depends on clamp scaling and V nominal ±1% ±10 counts Excluding line resistance accuracy.
Harmonics
Harmonic Order (n) DC, 1 to 50 Grouping: Harmonic groups according to IEC 61000-4-7.
Inter-Harmonic Order (n) OFF, 1 to 50 Grouping: Harmonic and Interharmonic subgroups according to IEC 61000-4-7.
Volts % f 0.0% to 100% 0.1% ±0.1% ±n x 0.1%.
r 0.0% to 100% 0.1% ±0.1% ±n x 0.4%.
Absolute 0.0 to 1000 V 0.1 V ±5%1
THD 0.0% to 100% 0.1% ±2.5%.
Amps % f 0.0% to 100% 0.1% ±0.1% ±n x 0.1%.
r 0.0% to 100% 0.1% ±0.1% ±n x 0.4%.
Absolute 0.0 to 600 A 0.1 A ±5% ±5 counts.
THD 0.0% to 100% 0.1% ±2.5%.
Watts % f or r 0.0% to 100% 0.1% ±n x 2%.
Absolute Depends on clamp scaling and V nominal ±5% ±n x 2% ±10 counts.
THD 0.0% to 100% 0.1% ±5%.
Phase Angle -360° to +0° ±n x 1°.
Flicker
Plt, Pst, Pst (1 min) Pinst 0.00 to 20.00 0.01 ±5%.
Unbalance
Volts % 0.0% to 20.0% 0.1% ±0.1%.
Amps % 0.0% to 20.0% 0.1% ±1%.
Mains Signaling
Threshold Levels Threshold, limits and signaling duration is programable for two signaling frequencies
Signaling Frequency 60 Hz to 3000 Hz 0.1 Hz
Relative V % 0% to 100% 0.10% ±0.4%.
Absolute V3s (3 second avg.) 0.0 V to 1000 V 0.1 V ±5% of nominal voltage.
General Specifications
Case Design Rugged, shock proof with integrated protective holster Drip and dust proof IP51 according to IEC60529 when used in tilt stand position Shock and vibration Shock 30 g, vibration: 3 g sinusoid, random 0.03 g 2 /Hz according to MIL-PRF-28800F Class 2.
Display Brightness: 200 cd/m 2 typ. using power adapter, 90 cd/m 2 typical using battery power Size: 127 x 88 mm (153 mm/6.0 in diagonal) LCD Resolution: 320 x 240 pixels Contrast and brightness: user-adjustable, temperature compensated.
Memory 8 GB SD card (SDHC compliant, FAT32 formatted) standard, upto 32GB optionally Screen save and multiple data memories for storing data including recordings (dependent on memory size).
Real-Time Clock Time and date stamp for Trend mode, Transient display, System Monitor and event capture.
Environmental
Operating Temperature 0°C ~ +40°C; +40°C ~ +50°C excl. battery.
Storage Temperature -20°C ~ +60°C.
Humidity +10°C ~ +30°C: 95% RH non-condensing
+30°C ~ +40°C: 75% RH non-condensing
+40°C ~ +50°C: 45% RH non-condensing.
Maximum Operating Altitude Up to 2,000 m (6666 ft) for CAT IV 600 V, CAT III 1000 V
Up to 3,000 m (10,000 ft) for CAT III 600 V, CAT II 1000 V
Maximum storage altitude 12 km (40,000 ft).
Electro-Magnetic-Compatibility (EMC) EN 61326 (2005-12) for emission and immunity.
Interfaces Mini-USB-B, Isolated USB port for PC connectivity SD card slot accessible behind instrument battery.
Fluke 434 II warranty Three years (parts and labor) on main instrument, one year on accessories.
1. ±5% if ≥ 1% of nominal voltage ±0.05% of nominal voltage if < 1% of nominal voltage.
2. 50Hz/60Hz nominal frequency according to IEC 61000-4-30.
3. 400Hz measurements are not supported for Flicker, Mains Signaling and Monitor Mode.
4. For nominal voltage 50 V to 500 V.

Download

Fluke 430 Series Datasheet

PDF Specifications of the Fluke 434, 435 & 437 Power Analysers.

Download (1.35M)

No customer reviews for the moment.

Write your review

Fluke 434 Series II PQ Analyser
COMPONENT PARTS DESCRIPTION PART No.
AC285 SureGrip Aligator Clips. 1610159
Fluke i30 AC/DC Current Clamp (30 A). 2584920
i400s AC Current Clamp (400 A0. 2277202
i6000s Flex-24 AC Current Clamp (6000 A). 4637337
GPS430-ll GPS Synchronisation module (430-ll series). 4693803
TLS430 Test leads and Aligator clips (4 black, 1 green). 2157713

16 other products in the same category:

arrow_upward