A special kit containing the Megger MFT1721 Installation Tester and the award-winning Megger DCM305E Earth leakage Clamp.
Warning: Last items in stock!
Cuthbertson Laird Ireland are now offering a kit comprising of a multifunction installation tester, the top-of-the-range Megger MFT1741, plus the award-winning, earth leakage clamp from Megger, the DCM305E. The total list price is £1764. Buy today for only £1050 + VAT (€1177.00 approx.)
The Megger MFT1741 multifunction tester is an instrument designed for testing low voltage electrical installations and especially in locations that suffer from high electrical noise.
The MFT1741 offers all of the facilities needed to test electrical installations in line with the requirements of the IET Wiring Regulations, as well as valuable additional functionality such as the earth electrode resistance measurement.
As well as three-wire non-trip loop impedance testing, the MFT1741 offers two-wire testing, which is invaluable when tests must be carried out at locations where no neutral connection is available. High-current testing which delivers the fastest possible results for circuits that are not protected by an RCD or RCBO is also available.
New Loop Impedance testing technology
The MFT1741 includes a new non-trip loop testing technology that:
Prevents any influence the RCD may present to the total loop impedance value.
Faster non-trip loop testing down to 8 seconds.
This technique also allows testing of loop impedance through 10mA type AC and Type A RCDs.
Overlaying the new non-trip loop impedance measurement is the new Megger “Confidence meter”. As loop impedance values can be dramatically affected by circuit noise, the Confidence Meter displays the degree of confidence in the accuracy of the measured loop impedance. Using the digital ARC to indicate the analytical process, the measurement is continually monitored and adjusted when circuit noise is present, resulting in a dramatically improved and repeatable test result.
Enhanced non-trip loop impedance measurement technology.
“Confidence meter” measurement analysis (patent pending).
Full single and 3 phase compliant installation testing.
10 mA to 1 A single and 3 phase RCD testing.
Simple colour-coded test selection.
|250 V, 500 V||Y|
|Test voltage display||Y|
|Adjustable buzzer threshold||Y|
|Continuity and resistance ranges|
|200 mA test||Y|
|15 mA test||Y|
|Adjustable buzzer threshold||Y|
|2 and 3 wire non-tripping L-PE 50 V ~ 280 V||Y|
|2 wire Hi current L-N 50 V ~ 280 V||Y|
|2 wire phase to phase L-L 50 V ~ 500 V||Y|
|PSCC and PFC (20 kA max.)||Y|
|Max. Zs display||Y|
|R1 + R2 value||NO|
|Touch voltage display on faulty earth||Y|
|Earth electrode test|
|2 and 3 pole *||Y|
|3 pole ART and Stakeless method *||Y|
|1/2, 1, 5 x I and ramp RCD test||Y|
|Auto RCD test||Y|
|Type AC, A and S RCDs||Y|
|Type B (pure DC) RCDs||Y|
|3-phase RCD (no earth)||Y|
|30, 100, 300 and 500 mA RCD||Y|
|10 mA and 1000 mA RCD||Y|
|Hard moulded case||NO|
|Confidence meter noise reduction||Y|
|New hardware loop test platform||Y|
|* requires optional accessory|
|Output voltage||-0% +20% at rated load or less.|
|Voltage display||±3% ±3 digits ±0.5% of rated voltage.|
|Internal current measurement:||0 to 220 A.|
|RESISTANCE & CONTINUITY
0.01 Ω ~ 99.9 Ω - ±2% ±2 digits
100 Ω ~ 99.9 kΩ - ±5% ±2 digits.
|Open circuit voltage||5 V ±1 V.|
(0 Ω ~ 2 Ω)
205 mA ±5 mA
15 mA ±5 mA
|Live to earth/neutral supply||48 V ~ 280 V (45 Hz ~ 65 Hz).|
|Live to live supply||48 V ~ 500 V (45 Hz ~ 65 Hz).|
|L-N/L-L tests||±5% ±5 digits.|
|0.1 Ω ~ 39.9 Ω: ±5% ±5 digits ± noise margin
40.0 Ω ~ 1000 Ω: ±10% ±5 digits.
|† Reference conditions apply|
|Supply up to 100 mA||48 V ~ 480 V (45 Hz ~ 65 Hz).|
|Supply up to 1 A||48 V ~ 280 V.|
|RCD type||Type AC, A, S
Type B (pure dc).
|No trip test||(1/2xI) –10% ~ –0%.|
(1xI, 2xI and 5xI) +0% ~ +10%.
|Power supply||IEC LR6 type AA alkaline (6 cells - supplied)
or 1.2 V NiMH (rechargeable pack of 6 – supplied)
Mains charger for on-board re- charging (4 hours typical).
|Data storage||1000 results.|
|EMC||IEC61326 edition 2 location class B.|
|Operating temperature range||-10 °C ~ +55 °C.|
|Dimensions||220 mm H x 390 mm W x 285 mm D.|
|Weight||1 kg (with batteries, excluding case).|
|Megger MFT1741 warranty||One year (upgradeable to 3 years FREE).|
|Includes||Printed quick start guide, Full user guide on CD, Calibration certificate, Switched probe SP5, Neck strap - Megger embroidered, 3 Wire lead set with prods and clips, Mains plug test lead, AC battery charger, Large soft pouch with extra storage.|
The Megger DCM305E is designed to check earth leakage currents; however the upper range enables TRMS AC current measurements of up to 100 A. TRMS meters can measure both pure, undistorted, sinusoidal AC waveforms and non-sinusoidal AC waveforms which can contain pulse trains, triangles, spikes and other ragged waves.