loading spinner
Megger MFT1741 Multifunction Tester
  • Megger MFT1741 Multifunction Tester
  • Megger MFT1741 Multifunction Tester
  • Megger MFT1741 Multifunction Tester

Megger MFT1741 Multifunction Tester

Megger approved distributor and service centre.

Includes: Printed quick start guide, Full user guide on CD, Calibration certificate, Switched probe SP5, Neck strap - Megger embroidered, 3 Wire lead set with prods and clips, Mains plug test lead, AC battery charger, Large soft pouch with extra storage.

1009-986
Megger
£1039.00
£1246.8 Inc. VAT
In Stock

Megger Components Shortage

PLEASE NOTE: Megger is currently experiencing a global shortage of components for their popular MFT 1700 Series. We are currently operating a waiting list and as stock becomes available we will ship your order. If you would like to get your hands on these industry-leading MFT's, then we strongly advise that you get in the queue.


The Megger MFT1741 multifunction tester is an instrument designed for testing low voltage electrical installations and especially in locations that suffer from high electrical noise.

The MFT1741 offers all of the facilities needed to test electrical installations in line with the requirements of the IET Wiring Regulations, as well as valuable additional functionality such as the earth electrode resistance measurement.

As well as three-wire non-trip loop impedance testing, the MFT1741 offers two-wire testing, which is invaluable when tests must be carried out at locations where no neutral connection is available. High-current testing which delivers the fastest possible results for circuits that are not protected by an RCD or RCBO is also available.

New Loop Impedance testing technology

The MFT1741 includes a new non-trip loop testing technology that:

Prevents any influence the RCD may present to the total loop impedance value.
Faster non-trip loop testing down to 8 seconds.

This technique also allows testing of loop impedance through 10mA type AC and Type A RCDs.

Overlaying the new non-trip loop impedance measurement is the new Megger “Confidence meter”. As loop impedance values can be dramatically affected by circuit noise, the Confidence Meter displays the degree of confidence in the accuracy of the measured loop impedance. Using the digital ARC to indicate the analytical process, the measurement is continually monitored and adjusted when circuit noise is present, resulting in a dramatically improved and repeatable test result.

FEATURES

Enhanced non-trip loop impedance measurement technology.
“Confidence meter” measurement analysis (patent pending).
Full single and 3 phase compliant installation testing.
10 mA to 1 A single and 3 phase RCD testing.
Simple colour-coded test selection.
Ambidextrous operation.

MFT1741 Quick Feature Chart
Insulation ranges
100 V
250 V, 500 V
1000 V
Test voltage display
Adjustable buzzer threshold
Continuity and resistance ranges
200 mA test
15 mA test
Adjustable buzzer threshold
Loop testing
2 and 3 wire non-tripping L-PE 50 V ~ 280 V
2 wire Hi current L-N 50 V ~ 280 V
2 wire phase to phase L-L 50 V ~ 500 V
PSCC and PFC (20 kA max.)
Max. Zs display
R1 + R2 value
Touch voltage display on faulty earth
Earth electrode test
2 and 3 pole *
3 pole ART and Stakeless method *
RCD tests
1/2, 1, 5 x I and ramp RCD test
Auto RCD test
Type AC, A and S RCDs
Type B (pure DC) RCDs
Programmable RCD
3-phase RCD (no earth)
30, 100, 300 and 500 mA RCD
10 mA and 1000 mA RCD
Other features
Supply measurement
True RMS
Phase rotation
Hard moulded case
Confidence meter noise reduction
New hardware loop test platform
* requires optional accessory
Megger MFT1741 Specifications
Insulation
Output voltage -0% +20% at rated load or less.
Voltage display ±3% ±3 digits ±0.5% of rated voltage.
Resolution 0.1 A.
Internal current measurement 0 to 220 A.
Resistance & Continuity
Accuracy
0.01 Ω ~ 99.9 Ω - ±2% ±2 digits
100 Ω ~ 99.9 kΩ - ±5% ±2 digits.
Open circuit voltage 5 V ±1 V.
Test current
(0 Ω ~ 2 Ω)
205 mA ±5 mA
15 mA ±5 mA
(user selectable).
Loop Test
Live to earth/neutral supply 48 V ~ 280 V (45 Hz ~ 65 Hz).
Live to live supply 48 V ~ 500 V (45 Hz ~ 65 Hz).
L-N/L-L tests ±5% ±5 digits.
L-E tests
0.1 Ω ~ 39.9 Ω: ±5% ±5 digits ± noise margin
40.0 Ω ~ 1000 Ω: ±10% ±5 digits.
Reference conditions apply
RCD Tests
Supply up to 100 mA 48 V ~ 480 V (45 Hz ~ 65 Hz).
Supply up to 1 A 48 V ~ 280 V.
RCD type Type AC, A, S
Type B (pure dc).
No trip test (1/2xI) –10% ~ –0%.
Trip test
(1xI, 2xI and 5xI) +0% ~ +10%.
General Specifications
Power supply IEC LR6 type AA alkaline (6 cells - supplied)
or 1.2 V NiMH (rechargeable pack of 6 – supplied)
Mains charger for on-board re-charging (4 hours typical).
Data storage 1000 results.
EMC IEC61326 edition 2 location class B.
Operating temperature range -10 °C ~ +55 °C.
IP rating IP54.
Dimensions 220 mm H x 390 mm W x 285 mm D.
Weight 1 kg (with batteries, excluding case).
Megger MFT1741 warranty One year (upgradeable to 3 years FREE).

Download

Megger MFT1741 Datasheet

PDF Specifications of the Megger MFT1741 Multi-function Installation Tester.

Download (490.89k)

No customer reviews for the moment.

Write your review

Megger MFT1741 Multifunction Tester
COMPONENT
DESCRIPTION PART No.
PowerSuite Lite 17th Edition software. 1000-631
Test lead set Fused 10 A test lead set (red/blue/green) with prods and clips. 1001-975
ETL30 Extension Test Lead 30 m. 1000-215
ETL50 Extension Test Lead 50 m. 1000-217
ICLAMP Current measuring clamp. 1001-012
VCLAMP Voltage inducing clamp, calibration check pcb (for stakeless test) and lead. 1001-013
Earth kit 3 Pole Earth Test Kit. 6210-160
Car charger Cigar lighter adapter for battery charging. 6280-332

16 other products in the same category:

arrow_upward