loading spinner
  • Reduced price
Martindale LP2000 Loop Tester
  • Martindale LP2000 Loop Tester
  • Martindale LP2000 Loop Tester

Martindale LP2000 Loop Tester

Martindale approved distributor and service centre.

Includes: LP2000 soft carry case, mains test lead (TL205), green wander lead (TL61) & manual.

£285.60 Save 15%
Tax excluded
  • done HTTPS SECURE: Our pages are encrypted and protected from cyber-attack.
  • done COMPLIANT: Payment Card Industry Data Security Standard (PCI DSS) Compliant.
  • done PROTECTED: by TLS (SSL) - all data/information is secure from interception.

The Martindale LP2000 Digital Loop Tester is a hand-held, mains powered instrument designed to measure the loop and prospective short circuit current (Ipsc) of electrical circuits in accordance with the 17th Edition of the IEE wiring regulations (BS EN 7671).

It has a 3½ digit liquid crystal display and is available in various versions. The loop is measured over two ranges to 199.9Ω with auto range at 15Ω and with resolutions of 0.01 and 0.1Ω. The Ipsc is measured over one range of 19.99 kA with a resolution of 0.01kA.

Three measurement modes, selected by the function switch, enable loop measurements to be made between the phase and earth conductor in the mains lead and prospective short circuit current measurements between the phase and neutral conductors in the mains lead.


Test current of 24A, rms for two half cycles at 240V.
Overvoltage CAT III rating.
Suitable for use on 240V systems.
Carries out P-E and P-N loop tests.
Displays PSCC readings up to 19.99.

Martindale LP2000 Specifications
Supply Voltage 200 to 260 V rms, 50/60 Hz.
Test Current 24 A, rms, for two half cycles at 240 V.
Loop Range 0 to 15 Ω nominal in steps of 0.01 Ω
15 to 199.9 Ω in steps of 0.1 Ω.
Accuracy ±2% of reading, ±2 digit.
Temperature Coefficient  ±0.1%/°C.
Ipsc Range 0 to 19.99 kA in steps of 0.01 kA.
Fuse 5 A, HBC, Anti-Surge Ceramic, DIN 5 x 20 mm.
Transient Protection VDR at input.
Thermal Protection Electronic Delay.
Safety EMC: To BS EN 50081-1, BS EN 50082-1
LVD: To BS EN 61010-1.
Socket 4 mm shrouded mains CEE22 (IEC320).
Leads Mains lead with moulded plug (13 A fuse). Wander 
earth lead with fused retractable probe and 4mm
safety plug.
Operating Temperature 0 to 40°C.
Storage Temperature -20 to 70°C.
Operating Humidity 90% RH max at +40°C.
Display Custom liquid crystal.
Instrument Housing Moudled in ABS and polycarbonate.
Dimensions 54 x 190 x 90 mm Approx.
Weight 0.4 kg (without carry case).
Martindale LP2000 warranty Two-years.


Martindale LP2000 Datasheet

PDF Specifications of the Martindale LP2000 High Current Loop Tester.

Download (61.08k)

No customer reviews for the moment.

Write your review

Martindale LP2000 Loop Tester
Three Wire Fused Lead Martindale 3 wire test lead set with 2 10A fused probes and crocodile clips, fitted with IEC connector. MARTL88
Case Soft carry case with lead pouch, suitable for Martindale IN series insulation testers, EZ & LP loop testers, RCD testers,
MM Series multimeters, PD690, VI13700G, LTDV, DT75 & Drummond test lamps.
SB13 Safebreak R2 Socket Adaptor The SB13 enables safe and fast testing at socket outlets without the need to remove the socket faceplate from the wall. MARSB13

7 other products in the same category: