loading spinner
  • Reduced price
Megger MIT230 Insulation & Continuity Tester
  • Megger MIT230 Insulation & Continuity Tester
  • Megger MIT230 Insulation & Continuity Tester
  • Megger MIT230 Insulation & Continuity Tester

Megger MIT230 Insulation & Continuity Tester

Megger approved distributor and service centre.

Includes: Lead set with prods and clips, carry case & Megger MIT 230 users manual.

£357.00 Save 15%
Tax excluded
  HTTPS Secure

Our pages are encrypted and protected from cyber-attack.


Payment Card Industry Data Security Standard (PCI DSS) Compliant.


TLS (SSL) - all data/information is secure from interception.

The Megger MIT230 is one of the smallest insulation testers available on the market today. With options of a two and three test voltage instruments, the MIT200 instruments offer a range of safety and operation features.

The small size and light weight makes the Megger MIT230 ideal for those engineers that need to carry them for extended periods. The MIT230 display offers a combination of digital readout and analogue display, using Megger’s patented DART display technology, which include the benefits of an LCD display, such as robust, clear and accurate measurement, with an analogue pointer response for evaluating circuit charge and discharge characteristics.

A continuity buzzer on the megger MIT230 provides a means of rapid cable testing and circuit identification, with voltage protection should you accidentally touch a live circuit. The buzzer operates at a 2O threshold. The instrument housing is in tough ABS, designed to with-stand the rigours of hard use, and is small enough to drop into your pocket when not in use.

The instrument will inhibit testing on circuits over 50V on both continuity and insulation test ranges, protecting the operator and the instrument from injury or damage.


Meets the international requirements of EN 61557 for Insulation and Continuity testing.
Display of insulation measurement up to 1000 MΩ on a combined analogue arc and a digital display.
Continuity range with 0,01 Ω resolution and a short circuit current in excess of 200 mA.
Automatic continuity testing leaves both hands free. No need to press the test button.
Automatic power-down if left unattended to preserve battery power.
Automatic voltage detection and warning avoids accidental contact with hazardous live circuits.
Test lead zero allows compensation for test lead resistance up to 10 Ω.

Getting Started With The Megger MIT200 Series

Megger MIT230 Specifications
Insulation voltage 250V, 500V & 1000V.
Measurement range 10 kΩ - 1000 MΩ on all ranges.
Test inhibit If more than 50 V is detected, testing will be inhibited.
Zero offset adjust 0 to 9,99 Ω.
Continuity buzzer Operates at < 3Ω.
Digital/Analogue display
Storage temperature range and humidity -25 °C to +65 °C.
Auto power down Auto power down operates after 10 minutes if left in standby mode.
Battery life 3000 consecutive tests (5 seconds per test) on any test using 2 Ah batteries.
IP rating IP40.
EMC In accordance with IEC61326-1.
Dimensions 195 x 98 x 40mm.
Weight 530g approx.
Megger MIT230 Warranty 3 year.


Megger MIT200 Series Datasheet

PDF Specifications of the Megger MIT220 & MIT230.

Download (296.12k)

No customer reviews for the moment.

Write your review

Megger MIT230 Insulation & Continuity Tester
Leads Unfused lead set (red/black) and crocodile clips. 1002-001
Fused leads Fused test lead set (1 pair). 1002-015
Holster Removable protective holster. 1007-166
Soft case Soft carry case MIT200 series. 6220-773

16 other products in the same category: