Megger EasyTest 20 kV Cable Tester

Includes: Connection cable for HV, mains supply and earth, Accessory bag, Carrying belt, Operating manual.

Reference 820007931

Brand SebaKMT

The Easytest represents a simplified version of the standard VLF test. It has been designed to verify operational integrity versus operational reliability, which is the objective of a standard VLF test in accordance with the respective standards.

Typically, a simplified test is performed in accordance with company specifications after repairs or after a new cable or circuit has been installed. The purpose of such a test is to verify the integrity of the cable and there accessories before switching the circuit back into operation. The Easytest allows such a test at voltages well above operating voltage in order to provide a safe indication regarding operational integrity.

With an output voltage of 20 kV and 0.1 Hz AC at 0.5 μF (and up to 2.5 μF at 0.02 Hz), the Easytest provides sufficient power to test 20 kV cables that are up to 2 km in length at 0.1 Hz with a test voltage of 1.7 Uo.

An optional logging function allows the measured data to be saved on a USB memory stick. In combination with the Winkis/chip card version, all test parameters can be set directly from the PC. After inserting the chip card, the test parameters saved on it are loaded directly to the Easytest, and once the test has taken place, the readings are stored on the chip card.

FEATURES

Easy to operate.
Configurable test sequences.
Compact, rugged and lightweight design.
AC, DC and sheath testing in one single system.
Reporting via USB or Winkis.

Megger Easytest 20kv Specifications

AC testing	0-20 kV 0.5 μF @ 0.1 Hz 1 μF @ 0.05 Hz 2.5 μF @ 0.02 Hz 5 μF @ 0.01 Hz.
DC testing	0-20 kV with leakage current measurement.
Leakage current measurement	Automatic change-over between two measuring ranges: 0-1 mA 1-50 mA.
Breakdown detection	Visual signalisation.
Timer	0-60 minutes, 5 min. interval.
Sheath testing	0-5 kV, 0-10 kV.
Sheath fault location	0-5 kV, 0-10 kVDC, duty cycling 1:3.
Safety	F-Ohm monitoring/emergency stop, HV key interloc.
Supply	110 V or 230 V, 750 W.
Operating temperature	-20°C - +50°C.
Storage temperature	-20°C - +60°C.
Protection class	IP 54 with closed lid.
Dimensions (W x H x D)	480 x 290 x 495 mm.
Weight	17 kg.
Megger Easytest 20 kV warranty	One-year.