loading spinner
Fluke 718-100G Pressure Calibrator
  • Fluke 718-100G Pressure Calibrator
  • Fluke 718-100G Pressure Calibrator

Fluke 718-100G Pressure Calibrator

fluke Approved distributor

lead time  Lead Time Approx. 7-14 Days.

Includes: Fluke 718, Protective Yellow Holster with test lead storage, Instructions Sheet (14 languages), Test Leads and Alligator Clip, Two 9V alkaline batteries, NIST - Traceable calibration report and data.

£3408 Inc. VAT
In Stock

This compact pressure calibration solution is about a third of the size of comparable instruments and weighs just one kilogram (two pounds). The unique easy to clean pump helps protect the pump from damage and provides the ability to service the pump without disassembly, even in the field.

The Fluke 718 makes 5-digit pressure readings in the following units: psi, inH2O at 4 °C, inH2O at 20 °C, kPa, cmH2O at 4 °C, cmH2O at 20 °C, bar, mbar, kg/cm2, inHg, and mmHg. Note: For use with non-corrosive gasses.


Pressure Source and Milliamp measurement to calibrate and maintain almost any pressure device.
Integrated pump is easily cleaned when accidently exposed to fluids.
Error % calculation for quicker pass/fail decision making in the field.
Best in class mA accuracy of 0.015 % for better measurement confidence and workload coverage.
Min/Max/Hold to capture changing measurements.
Switch test feature for quicker and more accurate pressure switch testing.

Fluke 718 Specifications
Fluke 718 Series
Measure pressure (Internal sensor).
Accuracy 0.025% full scale.
Functions Zero, min/max, hold, damp.
Dry air, non-corrosives only.
Fluke 718 1G
Range -1 psi to +1 psi, -68.9 mbar to 68.9 mbar (-6.89 kPa to 6.89 kPa).
Resolution 0.0001 psi, 0.001 mbar, 0.0001 kPa.
Over pressure 5x Full Scale.
Functions Zero, Min, Max, Hold, Damp.
Fluke 718 30G
Range -12 psi to 30 psi, (-850 mbar to 2 bar, -85 to 206.84 kPa).
Resolution 0.001 psi, 0.1 mbar, 0.01 kPa.
Over pressure 5x Full Scale.
Functions Zero, Min, Max, Hold, Damp.
Fluke 718 100G
Range -12 psi to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa).
Resolution 0.01 psi, 0.1 mbar, 0.01 kPa.
Over pressure 2x Full Scale.
Functions Zero, Min, Max, Hold, Damp.
Fluke 718 300G
Range -12 psi to 300 psi, (-850 mbar to 20 bar, -85 to 2068.42 kPa).
Resolution 0.01 psi, 1 mbar, 0.1 kPa.
Over pressure 375 psi 25 bar.
Functions Zero, Min, Max, Hold, Damp.
Fluke 718 series via 700 Series Pressure Modules
Range 29 pressure modules, 0 – 1 inH20 to 10,000 psi, 2.5 mbar to 700 bar. Over pressure per pressure module specs.
Resolution Per pressure module specs.
Accuracy To 0.025% of full span, per pressure module specs.
Functions Zero, Min, Max, Hold, Damp.
Media compatibility per pressure module specs
Fluke 718 Series Via Built in Pump
Range -12 psi or -850 mbar to full scale Supported Pressure Units; psi, inH20 (4°C), inH20 (20°C), cmH20 (4°C), cmH20 (20°C), bar, mbar, kPa, inHg, mmHg, kg/cm.
Loop power range 24 V DC.
Accuracy ±10%.
Drive; 20 mA into 1000 Ω for battery > 6.8 V; 700 Ω for battery 5.8 to 6.8 V.
mA Measure
Range 0 mA to 24 mA.
Resolution 0.001 mA.
Accuracy 0.015% + 1 count.
General Specifications
Maximum voltage 30 volts (non-operating).
Temperature -40°C to 60°C.
Operating temperature -10°C to 55°C.
Relative humidity 95% (10°C to 30°C); 75% (30°C to 40°C); 45% (40°C to 50°C); 35% (50°C to 55°C).
Operating altitude 3,000 M max.
Shock 1 M drop test.
Vibration Random, 2 g, 5 Hz – 500 Hz.
Safety CSA C22.2 No. 1010.1: 1992.
EMC EN50082-1: 1992 and EN55022: 1994 Class B.
Size 216 x 94 x 66 mm (8.50 x 3.72 x 2.60 in).
Weight 992 g (35 oz).
Power, battery life 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718.
Battery life 4 to 20 hours typical, depending on functions used.
Fluke 718 warranty Three years (one year on pressure pump).
Display LCD, 5 digit pressure and current simultaneous.
For use with non-corrosive gasses.


Fluke 717, 718 & 718Ex Datasheet

PDF Specifications of the Fluke 717, Fluke 718 & Fluke 718Ex Pressure Calibrators.

Download (265.42k)

No customer reviews for the moment.

Write your review

Fluke 718-100G Pressure Calibrator
C101 The hard case that fits all Fluke Industrial Test Tools. Configure the diced foam interior to store and protect what you need to carry with you. 2437514
C550 Tool bag. Steel reinforced frame with large zippered storage compartment with 25 pockets. 1547919
AC220 SureGrip™ Alligator Clip Set. 1610103
700PRV-1 Fluke 700PRV Pressure Relief Valve Kit. 2811808
700HTH-1 The Fluke 700HTH-1 hydraulic test hose allows connection to both a Fluke pressure module and a calibration unit under test from a Fluke 700HTP-1 hydraulic test pump simultaneously. 2811795
700PMP Hand-operated pressure pump to provide pressures up to 150 psi/1000 kPa. 617131
700HTP-2 Hydraulic test pump, 690 bar. 4096855
TL220-1 SureGrip™ Industrial Test Lead Set designed to provide a reliable grip in slippery hands. With interchangeable test lead set for multiple electrical applications. 3971178
TL71-1 The TL71-1 Premium Test Lead Set has one pair of red and black comfort grip probes with flexible silicone-insulated, right-angle test leads.. 3971207

16 other products in the same category: