- Hamilton01698 829711
- Leeds0113 235 1356
- Belfast02890 830302
Fluke 718-30G Pressure Calibrator
Includes: Fluke 718, Protective Yellow Holster with test lead storage, Instructions Sheet (14 languages), Test Leads and Alligator Clip, Two 9V alkaline batteries, NIST - Traceable calibration report and data.
This compact pressure calibration solution is about a third of the size of comparable instruments and weighs just one kilogram (two pounds). The unique easy to clean pump helps protect the pump from damage and provides the ability to service the pump without disassembly, even in the field.
The Fluke 718 makes 5-digit pressure readings in the following units: psi, inH2O at 4 °C, inH2O at 20 °C, kPa, cmH2O at 4 °C, cmH2O at 20 °C, bar, mbar, kg/cm2, inHg, and mmHg. Note: For use with non-corrosive gasses.
FEATURES
Pressure Source and Milliamp measurement to calibrate and maintain almost any pressure device.
Integrated pump is easily cleaned when accidently exposed to fluids.
Error % calculation for quicker pass/fail decision making in the field.
Best in class mA accuracy of 0.015 % for better measurement confidence and workload coverage.
Min/Max/Hold to capture changing measurements.
Switch test feature for quicker and more accurate pressure switch testing.
Fluke 718 Series | |
Measure pressure | (Internal sensor). |
Accuracy | 0.025% full scale. |
Functions | Zero, min/max, hold, damp. |
Dry air, non-corrosives only. | |
Fluke 718 1G | |
Range | -1 psi to +1 psi, -68.9 mbar to 68.9 mbar (-6.89 kPa to 6.89 kPa). |
Resolution | 0.0001 psi, 0.001 mbar, 0.0001 kPa. |
Over pressure | 5x Full Scale. |
Functions | Zero, Min, Max, Hold, Damp. |
Fluke 718 30G | |
Range | -12 psi to 30 psi, (-850 mbar to 2 bar, -85 to 206.84 kPa). |
Resolution | 0.001 psi, 0.1 mbar, 0.01 kPa. |
Over pressure | 5x Full Scale. |
Functions | Zero, Min, Max, Hold, Damp. |
Fluke 718 100G | |
Range | -12 psi to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa). |
Resolution | 0.01 psi, 0.1 mbar, 0.01 kPa. |
Over pressure | 2x Full Scale. |
Functions | Zero, Min, Max, Hold, Damp. |
Fluke 718 300G | |
Range | -12 psi to 300 psi, (-850 mbar to 20 bar, -85 to 2068.42 kPa). |
Resolution | 0.01 psi, 1 mbar, 0.1 kPa. |
Over pressure | 375 psi 25 bar. |
Functions | Zero, Min, Max, Hold, Damp. |
Fluke 718 series via 700 Series Pressure Modules | |
Range | 29 pressure modules, 0 – 1 inH20 to 10,000 psi, 2.5 mbar to 700 bar. Over pressure per pressure module specs. |
Resolution | Per pressure module specs. |
Accuracy | To 0.025% of full span, per pressure module specs. |
Functions | Zero, Min, Max, Hold, Damp. |
Media compatibility per pressure module specs | |
Fluke 718 Series Via Built in Pump | |
Range | -12 psi or -850 mbar to full scale Supported Pressure Units; psi, inH20 (4°C), inH20 (20°C), cmH20 (4°C), cmH20 (20°C), bar, mbar, kPa, inHg, mmHg, kg/cm. |
Loop power range | 24 V DC. |
Accuracy | ±10%. |
Drive; 20 mA into 1000 Ω for battery > 6.8 V; 700 Ω for battery 5.8 to 6.8 V. | |
mA Measure | |
Range | 0 mA to 24 mA. |
Resolution | 0.001 mA. |
Accuracy | 0.015% + 1 count. |
General Specifications | |
Maximum voltage | 30 volts (non-operating). |
Temperature | -40°C to 60°C. |
Operating temperature | -10°C to 55°C. |
Relative humidity | 95% (10°C to 30°C); 75% (30°C to 40°C); 45% (40°C to 50°C); 35% (50°C to 55°C). |
Operating altitude | 3,000 M max. |
Shock | 1 M drop test. |
Vibration | Random, 2 g, 5 Hz – 500 Hz. |
Safety | CSA C22.2 No. 1010.1: 1992. |
EMC | EN50082-1: 1992 and EN55022: 1994 Class B. |
Size | 216 x 94 x 66 mm (8.50 x 3.72 x 2.60 in). |
Weight | 992 g (35 oz). |
Power, battery life | 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718. |
Battery life | 4 to 20 hours typical, depending on functions used. |
Fluke 718 warranty | Three years (one year on pressure pump). |
Display | LCD, 5 digit pressure and current simultaneous. |
For use with non-corrosive gasses. |
No customer reviews for the moment.
COMPONENT |
DESCRIPTION | PART No. | ||
C101 | The hard case that fits all Fluke Industrial Test Tools. Configure the diced foam interior to store and protect what you need to carry with you. | 2437514 | ||
C550 | Tool bag. Steel reinforced frame with large zippered storage compartment with 25 pockets. | 1547919 | ||
AC220 | SureGrip™ Alligator Clip Set. | 1610103 | ||
700PRV-1 | Fluke 700PRV Pressure Relief Valve Kit. | 2811808 | ||
700HTH-1 | The Fluke 700HTH-1 hydraulic test hose allows connection to both a Fluke pressure module and a calibration unit under test from a Fluke 700HTP-1 hydraulic test pump simultaneously. | 2811795 | ||
700PMP | Hand-operated pressure pump to provide pressures up to 150 psi/1000 kPa. | 617131 | ||
700HTP-2 | Hydraulic test pump, 690 bar. | 4096855 | ||
TL220-1 | SureGrip™ Industrial Test Lead Set designed to provide a reliable grip in slippery hands. With interchangeable test lead set for multiple electrical applications. | 3971178 | ||
TL71-1 | The TL71-1 Premium Test Lead Set has one pair of red and black comfort grip probes with flexible silicone-insulated, right-angle test leads.. | 3971207 |