- Reduced price
Druck DPI705 IS 0 - 2 Bar Gauge Manometer
Includes: The Druck DPI 705-IS Manometer is supplied with a user guide and calibration certificate as standard.
- done HTTPS SECURE: Our pages are encrypted and protected from cyber-attack.
- done COMPLIANT: Payment Card Industry Data Security Standard (PCI DSS) Compliant.
- done PROTECTED: by TLS (SSL) - all data/information is secure from interception.
Compact, robust and lightweight, the GE Druck DPI 705 IS pressure indicator is designed for single handed operation and provides many essential features required for routine maintenance and system troubleshooting. The GE DPI 705 IS indicator uses a micro-machined silicon transducer to produce a pressure reading in units of pressure measurement.
This intrinsically safe pressure indicator is certified by BASEEFA and CSA and has sucessfully met the examination and test requirements: EN50014 : 1992 and EN50020 : 1994 and EEx ia IIC T4 -10°C Tamb +50°C (15°F to 120°F). The DPI 705 IS pressure indicator may be used in zones 0, 1 or 2 for industries with any gas group.
If a key is not pressed within 10 minutes then the instrument times out and switches off.
To perform a leak test, press the LEAK key 3 times. The instrument counts down 60 seconds displaying the leakage at the end of the 60 second period. See video below.
A zero should be performed on gauge and differential instruments before measuring pressure. Note: A zero can only be performed on absolute pressure indicators if a vacuum is first applied to the pressure port.
A single alarm can be set to operate when the displayed pressure value rises above the alarm setting. The alarm causes the display to flash and a beeper to sound for one minute.
Adjustable zero and auto power off.
14 selectable pressure units.
Suitable for use with liquids compatible with the stainless steel diaphragm.
Ambient temperature indication in °C or °F.
60 second leak test mode.
Averaging filter for unstable pressure measurement.
Manual tare facility.
Adjustable audio/visual high pressure alarm.
Dust and waterproof to IP54.
|Pressure range||0 to 2 bar gauge.|
|Accuracy||0.1% FS accuracy.|
|Pressure Units||psi, inHg, inH2O (4°C, 20°C and 60°F), ftH2O (4°C, 20°C and 60°F), mmHg, mHg, mbar, bar, mH2O, Pa, hPa, KPa, MPa, Kgf/cm2.|
|Calibration Units||mbar, bar, psi, kPa, mPa, hPa, Kgh/cm2.|
|Leak test||Standard 60 second leak test.|
|Zero||Zero pressure correction.|
|Tare||0 to 100% FS zero offset capability.|
|Filter||10 reading rolling average for unstable pressures.|
|Alarm||Adjustable high pressure alarm with visual and audible warning.|
|Overpressure||Safe to 2 x FS. Display flashes at 110% FS.|
|Media compatibility||Internal sensor: stainless steel, except positive differential non-corrosive fluid and negative differential dry gas.|
|Ambient Temperature||°C and °F reading of local condition ±1.5°C (±3°F).|
|Display||13mm LCD with 99999 readout.|
|Power Management||Low battery indicator and selectable ‘auto off’.|
|Battery||3 x Alkaline cells.|
|Storage temperature||-10°C to 50°C (15°F to 120°F).|
IS Class I, Groups A, B, C & D, T4 Exia; Class I, Zone 0, AEx/Ex ia IIC T4 Ga (-10°C ≤ Ta ≤ +50°C) to CSA Std. 157-92, UL 913 (7th Ed.), CAN/CSA-C22.2 No. 60079-0:11, CAN/CSA-C22.2 No. 60079-11:11, ANSI/UL 60079-0:09 and ANSI/UL 60079-11:09.
Ex ia IIC T4 Ga (-10°C ≤ Ta ≤ +50°C) to ATEX IEC 60079-0:2011 and EN 60079-11:2012.
|Environmental||IP54 (NEMA 12).|
|Dimensions||190 x 90 x 36 mm.|
|Druck DPI705 IS warranty||One year.|
No customer reviews for the moment.
|Case||Leather case for DPI 705 IS models.||IO705SB|