loading spinner
  • Reduced price
Druck DPI880 Multifunction Calibrator
  • Druck DPI880 Multifunction Calibrator
  • Druck DPI880 Multifunction Calibrator
  • Druck DPI880 Multifunction Calibrator
  • Druck DPI880 Multifunction Calibrator

Druck DPI 880 Multifunction Calibrator

GE Druck approved distributor and Gold Channel Partner.

Includes: Calibration Certificate, Druck DPI880 User's Manual, Set of Electrical Test Leads and AA Alkaline Batteries.

£1,826.85 Save 5%
Tax excluded
  • done HTTPS SECURE: Our pages are encrypted and protected from cyber-attack.
  • done COMPLIANT: Payment Card Industry Data Security Standard (PCI DSS) Compliant.
  • done PROTECTED: by TLS (SSL) - all data/information is secure from interception.

The Druck DPI 880 Multi-function Calibrator is an ultra compact and simple to use tool for testing, configuring and calibrating virtually all process parameters. It measures, sources and simulates mA, mV, V, RTDs, thermocouples, ohms, frequency, pulses and pressure, captures switch values and provides 24 V loop power.

It is 35% smaller than competitive models and it’s interactive display means a more simple, easier-to-understand interface. Users no longer need to carry additional recording tools using the data logging capability, can obtain high precision data and address any issue in as much time as it takes to press a button, saving valuable operating time.

Simultaneous dual readings: The GE Druck DPI880 reads both input and output parameters simplifying calibrations and system diagnostics. Calibration values are captured on one screen and adjustments are seen in real time, for example, when making zero and span adjustments.

Programmable step and ramp outputs: Quickly step through calibrations with the %Step output or make zero and full scale adjustments using Span Check. The Ramp output is ideal for delicate analog meters, rate of change indicators and checking valve travel and slew rates.

Temperature: The DPI880 Measures or simulates RTD or thermocouple sensors and is the ideal tool for checking probes, transmitters, process loops, indicators and controllers. Use the Druck DPI 880 with a temperature probe to provide a versatile thermometer.

Pressure: Intelligent Digital Output Sensor (IDOS) Pressure Modules are available from 10 in H2O to 10,000 psi (25 mbar to700 bar). IDOS modules are Plug & Play requiring no instrument calibration or set-up to provide a fully featured pressure calibrator.


Sources and reads mA, mV, ohms, frequency and pulses.
Simulates and reads 8 RTDs and 12 thermocouples.
32 IDOS® ‘Plug-N-Play’ Pressure modules from 10 inH2O to 10,000 psi (25 mbar to 700 bar).
Simultaneous dual reading capability.
Automatic switch test and pressure leak test.
24 V loop power supply.
Data logging option.
Compact, simple to use, easy to carry.
Convenient one hand operation.

DPI 880 Product Video

Druck DPI 880 Specifications
Electrical Specifications
Measure accuracy Source accuracy
0 to 24.000 mA - 0.02% rdg + 2 counts.
0 to 55.000 mA 0.02% rdg + 3 counts. -
0 to 120.00 mV 0.02% rdg + 2 counts.
0 to 12.000 V - 0.02% rdg + 2 counts.
0 to 30.000 V 0.03% rdg + 2 counts. -
0 TO 4000.0 Ω 0.1 to 1.3 Ω.
Switch detection Open and closed, 2 mA current.
Loop power 24 V +/-10% (35 mA maximum).
HART mA loop resistor 250 Ω (menu selection).
Frequency Specifications
Measure accuracy Source accuracy
0 to 999.999 Hz 0.003% rdg + 2 counts. 0.003% rdg + 0.0023 Hz.
0 to 50.0000 kHz 0.003% rdg + 2 counts. 0.003% rdg + 0.0336 Hz.
0 to 999999 cpm 0.003% rdg + 2 counts.
0 to 59999 cpm - 0.003% rdg + 0.138 cpm.
0 to 999999 cph 0.003% rdg + 2 counts. -
0 to 99999 cph - 0.003% rdg + 0.5 cph.
Output waveform Square wave (zero crossing). -
Voltage input 30 V maximum. -
Trigger level 0 to 12 V resolution 0.1V. -
Output amplitude 0 to 12 VDC +/- 1% (10 mA maximum).
0 to 12 VAC pk-pk +/- 5% (10 mA maximum).
Temperature Specifications
Measure & Simulate Standard Range
Pt 50 (385) IEC 751 -328°F to 1562°F, (-200°C to 850°C).
Pt 100 (385) IEC 751 -328°F to 1562°F, (-200°C to 850°C).
Pt 200 (385) IEC 751 -328°F to 1562°F, (-200°C to 850°C).
Pt 500 (385) IEC 751 -328°F to 1562°F, (-200°C to 850°C).
Pt 1000 (385) IEC 751 328°F to 752°F, (-200°C to 400°C).
D 100 (392) JIS 1604-1989 -328°F to 1202°F, (-200°C to 650°C).
Ni 100 DIN 43760 -76°F to 482°F, (-60°C to 250°C).
Ni 120 MINCO 7-120 -112°F to 500°F (-80°C to 260°C).
Ohms - 0.1 to 1.3 Ω.
Excitation: 0.2 to 0.5 mA measure, 0.05 to 3 mA simulate. Pulse excitation currents minimum duration 10 ms.
General Specifications
Electrical Connection 4mm sockets and mini-jack thermocouple socket.
Calibrated Temperature 50°F to 86°F (10°C to 30°C) unless otherwise stated.
Operating Temperature 14°F to 122°F (-10°C to 50°C) unless otherwise stated
Temperature coefficient 14°F to 50°F, 86°F to 122°F
0.0017%FS/°F (-10°C to 10°C, 30°C to 50°C 0.003%FS/°C) For ohms 14°F to 50°F, 86°F to 122°F 0.0028%FS/°F (-10°C to 10°C, 30°C to 50°C 0.005%FS/°C).
Storage Temperature -4°F to 158°F (-20°C to 70°C).
Shock and Vibration BS EN61010:2001, Def Stan 66-31, 8.4 Cat III.
EMC BS EN61326-1:1998 + A2:2001.
Safety Electrical BS EN61010:2001. Pressure Equipment Directive (PED), Class SEP. CE marked.
Display Graphic LCD with backlight.
Dimensions 7.1 in x 3.3 in x 2 in (180 mm x 85 mm x 50 mm).
Weight 15 oz (425 g).
Batteries 3 AA alkaline, >50 hours measure, >10 hours 24V source.
Druck DPI880 warranty One-year.


Druck DPI880 Datasheet

PDF Specifications of the Druck DPI 880 Multifunction Calibrator.

Download (187.8k)

No customer reviews for the moment.

Write your review

Druck DPI 880 Multifunction Calibrator
Case Soft fabric carrying case with accessory pocket. IO800A
Stand Belt clip, wrist strap/hanging loop and bench stand. IO800B
Batteries/Charger NiMh batteries with charger, batteries charged externally. IO800C
Data-Log Option Data logging upgrade and RS232 lead. IO800E

9 other products in the same category: