- Hamilton01698 829711
- Leeds0113 235 1356
- Belfast02890 830302
Fluke 87V/E2 Combo Kit
Includes: Fluke 87V Industrial Multimeter, TL224 SureGrip™ Insulated Test Leads, AC220 SureGrip™ Alligator Clips, TL238 SureGrip™ Test Probes, ToolPak™ Magnetic Meter Hanging Kit, 80BK-A DMM Temperature Probe, C35 Soft Carrying Case and 9V battery (installed).
The Fluke 87V has improved measurement functions, troubleshooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution, and electro-mechanical equipment.
The Fluke 87V/E2 Combo Kit is built around the Fluke 87V, the most widely used industrial digital multimeter in the world, and includes special accessories to make you even more productive on the job.
KEY FEATURES
Unique function for accurate voltage and frequency measurements on adjustable speed motor drives.
Built-in thermometer.
Large digit display with bright, two-level backlight.
True-rms ac voltage and current for accurate measurements on non linear signals.
Selectable filter for accurate voltage and frequency measurements on motor drives.
0.05% DC accuracy.
6000 counts, 3-3/4 digits.
4-1/2 digit mode for precise measurements (20,000 counts).
Measure up to 1000 V AC and DC.
Measure up to 10 A, 20 A for up to 30 seconds.
Frequency to 200 kHz and % duty cycle.
Resistance, continuity and diode test.
10,000 µF capacitance range for components and motor caps.
Min/Max-Average recording with Min/Max Alert to capture variations automatically.
Peak capture to record transients as fast as 250 µs.
Relative mode to remove test lead interference from low ohms measurements.
Auto and manual ranging for maximum flexibility.
Touch Hold to capture stable readings avoiding noisy signals.
Analog bargraph for fast changing or unstable signals.
Input Alert provides audible warning against wrong use of input jacks.
Improved selectable sleep mode for long battery life.
Access door for fast battery changes without breaking the calibration seal.
Voltage DC | |
Maximum Voltage | 1000 V. |
Accuracy | ±(0.05% + 1). |
Maximum Resolution | 10 μV. |
Voltage AC | |
Maximum Voltage | 1000 V. |
Accuracy | ±(0.7% + 2) true RMS. |
AO Bandwidth | 20kHz with low pass filter; 3 dB @ 1k Hz. |
Maximum Resolution | 0.1 mV. |
Current DC | |
Maximum Current | 10 A (20 A for 30 seconds max). |
Accuracy | ±(0.2% + 2). |
Maximum Resolution | 0.01 μA. |
Current AC | |
Maximum Current | 10 A (20 A for 30 seconds max). |
Accuracy | ±(1.0%+2) true RMS. |
Maximum Resolution | 0.1 μA. |
Resistance | |
Max Resistance | 50 MΩ. |
Accuracy | ±(0.2% + 1). |
Maximum Resolution | 0.1 Ω. |
Capacitance | |
Maximum Capacitance | 9999 μF. |
Accuracy | ±(1%+2). |
Maximum Resolution | 0.01 nF. |
Frequency | |
Maximum Frequency | 200 kHz. |
Accuracy | ±(0.005%+1). |
Maximum Resolution | 0.01 Hz. |
Duty Cycle | |
Maximum Duty Cycle | 99.9%. |
Accuracy | ±(0.2% per kHz + 0.1%). |
Maximum Resolution | 0.1%. |
Temperature | |
Measurement Ranges | -200 to 1090° C -328 to 1994° F (excluding probe). |
Conductance | |
Maximum | 60.00 nS. |
Accuracy | ±(1.0% + 10). |
Maximum Resolution | 0.01 nS. |
Diode | |
Range | 3 V. |
Resolution | 1 mV. |
Accuracy | ±(2%+1). |
Duty Cycle | |
Accuracy | Within ±(0.2% per kHz +0.1%). |
Environmental Specifications | |
Operating Temperature | -20 to +55° C. |
Storage Temperature | -40 to +60° C. |
Humidity (Without Condensation) | 0 to 90% (0 to 35° C) 0 to 70% (35 to 55° C). |
Operating Altitude | 2000 m. |
Safety Specifications | |
Overvoltage Category | EN 61010-1 to 1000V CAT III, 600V CAT IV. |
Agency Approvals | UL, CSA, T-V, VDE listed. |
Mechanical/General Specifications | |
Dimensions | 201 x 98 x 52mm (with holster). |
Weight | 355g (624g with holster). |
Display | Digital - 6000 counts, updates 4/sec (19999 counts in high resolution mode) Analogue - 32 segments, updates 40/sec Frequency - 19999 counts, updates 3/sec at >10Hz. |
Fluke 87V Warranty | Lifetime. |
Battery Life | Alkaline - 400 hours typical (without backlight). |
Shock | 1m drop-tested per IEC 61010-1: 2001. |
Vibration | Per MIL-PRF-28800 for a class 2 instrument. |
No customer reviews for the moment.
COMPONENT |
DESCRIPTION | PART No. | ||
C35 | Soft carrying case. | 2826056 | ||
C280 | Soft meter case. | 3182785 | ||
TPAK | ToolPak™ Magnetic Meter Hanger Kit includes: 9 inch hook and loop strap Universal hanger clip Hook hanger for non magnetic surfaces Strong magnet. |
1281997 | ||
i200s | AC Current Clamp (200 A). | 664760 | ||
TL223-1 | Electrical Test Lead Set. | 3971184 | ||
TL71-1 | Premium Test Lead Set. | 3971207 | ||
TL225-1 | SureGrip™ Stray Voltage Adapter Test Lead Kit includes: SV225 Stray Voltage Eliminator TL224 SureGrip™ Silicone Test Lead Set (right to straight) TP238 SureGrip™ Insulated Test Probe Set C75 Accessory Case. |
3971191 |