- Hamilton01698 829711
- Leeds0113 235 1356
- Belfast02890 830302
Fluke 28 II Industrial Multimeter
Includes: TL175 Test Leads, AC175 Alligator Clips, 80BK-A Temperature Probe, Yellow Rubber Holster, Fluke 28-II Instruction Manual, Batteries & Information CD ROM.
The Fluke 28-II multimeter defines a new standard for operation in harsh conditions and is packed with the features and accuracy needed to troubleshoot most electrical problems.
In addition to the features of the Fluke 27-II, the Fluke 28-II has a unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment. This digital multimeter will also withstand hazardous 8000V spikes caused by load switching and faults on industrial circuits, and fully complies with 2nd Edition IEC and ANSI electrical safety standards.
When enclosed in its protective yellow holster, the Fluke 28II meter will float in fresh or salt water. Holsters are reversible to protect the display and controls in storage. Both meters feature backlit keypad buttons, large display digits and display backlighting for easy visibility in low-lit areas.
FEATURES
Measure up to 1000 V ac and dc.
Measure up to 10 A (20 A for 30 seconds).
10,000 μF capacitance range.
Frequency to 200 kHz.
Extended ac voltage bandwidth– 15 Hz to 20 kHz.
Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument.
Resistance, continuity and diode test.
IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments.
Designed to withstand 3 meter drop (with holster).
Hi resolution 20,000 count display mode.
True-rms ac voltage and current for accurate measurements on non linear signals.
Backlit keypad buttons allow for easy visibility in low lit areas.
Large display digits and 2 level bright white backlight for increased visibility.
DC voltage | Range: 0.1 mV to 1000 V. Accuracy: 0.05 % + 1. |
||
AC voltage | Range: 0.1 mV to 1000 V. Accuracy: 0.7 % +4. |
||
DC current | Range: 0.1 μA to 10 A. Accuracy: 0.2 % + 4. |
||
AC current | Range: 0.1 μA to 10 A. Accuracy: 1.0 % + 2. |
||
Resistance | Range: 0.1 Ω to 50 MΩ. | ||
Display counts | 6000 / 19,999. | ||
Capacitance | 1 nF to 9999 μF. | ||
Frequency | 0.5 Hz to 199.99 kHz. | ||
Temperature | -200 °C to +1090 °C. | ||
Low pass filter (Measurement on VSD’s) | Yes. | ||
Compliance | CAT IV 600 V , CAT III 1000V. | ||
IP Rating | IP 67. | ||
Display | Bar graph / backlight. | ||
Data storage | Peak transient capture: 250 μS. Min/Max/Avg: Yes. Reading hold: Yes. |
||
Power | Three AA batteries. | ||
Battery life | 800 hours. | ||
Safety rating | CAT IV 600 V/CAT III 1000 V. | ||
Drop test | 10 feet. | ||
Dimensions (with holster) | 6.35 cm x 10.0 cm x 19.81 cm (2.5 in x 3.93 in x 7.8 in). | ||
Weight (with holster) | 698.5 g (1.54 lb). | ||
Fluke 28II warranty | Limited lifetime. |
No customer reviews for the moment.
COMPONENT PARTS | DESCRIPTION | PART No. | ||
AC285 | AC285 SureGrip™ Alligator Clip Set. | 1610159 | ||
TLK225 | Fluke TLK-225 SureGrip™ Master Accessory Set. | 3971234 | ||
C100 | Hard Meter and Accessory Case. | 827055 | ||
C101 | Hard Case. | 2437514 | ||
C125 | Soft Meter Case. | 646858 | ||
C550 | Tool Bag. | 1547919 | ||
CXT80 | Rugged Pelican Hard Case. | 3352559 | ||
i1010 | i1010 AC/DC Current Clamp (1000A). | 617735 | ||
i200 | i200 AC Current Clamp (200A). | 664755 | ||
i400 | i400 AC Current Clamp (400A). | 2277225 | ||
i410 | AC/DC Current Clamp (400A). | 617727 | ||
i2000 | i2000 flex AC Current Clamp (2000A). | 2584912 | ||
i3000s | i3000s AC Current Clamp (3000A). | 657202 | ||
80K-40 | High Voltage Probe. | 382846 | ||
80K-6 | High Voltage Probe. | 532424 | ||
TL220-1 | SureGrip™ Industrial Test Lead Set includes: AC220 SureGrip™ Alligator Clip Set TP220 SureGrip™ Industrial Test Probe Set TL224 SureGrip™ Silicone Test Lead Set (straight to right) One year warranty. |
3971178 | ||
TL223-1 | TL223 Electrical Test Lead Set. | 3971184 | ||
TL71-1 | TL71 Premium Test Lead Set. | 3971207 |