- Hamilton01698 829711
- Leeds0113 235 1356
- Belfast02890 830302
Fluke 27 II Industrial Multimeter
Includes: Fluke 27II, Holster, Test Leads, Alligator Clips, Printed getting started manual, CD ROM manual, 3 AA batteries.
The Fluke 27 II digital multimeter defines a new standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. It has a IP 67 (waterproof and dustproof) rating, MSHA approvals and an extended operating temperature range.
The large digit display has a two level bright white backlight for increased visibility. The Fluke 27 II can withstand hazardous 8,000V spikes cause by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards.
When enclosed in their protective yellow holsters, the Fluke 27II meter will float in fresh or salt water. Holsters are reversible to protect the display and controls in storage. Both meters feature backlit keypad buttons, large display digits and display backlighting for easy visibility in low-lit areas.
FEATURES
Measure up to 1000 V ac and dc.
Measure up to 10 A (20 A for 30 seconds).
10,000 μF capacitance range.
Frequency to 200 kHz.
Extended ac voltage bandwidth – 40 Hz to 30 kHz.
Resistance, continuity and diode test.
Min/Max and average recording to capture variations automatically.
IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments.
Designed to withstand 3 meter drop (with holster).
Average responding voltage and current for measurements.
DC Voltage Range | 0.1 mV to 1000 V. |
DC Voltage Accuracy | 0.1% + 1. |
AC Voltage Range | 0.1 mV to 1000 V. |
AC Voltage Accuracy | 0.5% + 3. |
DC Current Range | 0.1 μA to 10 A. |
DC Currency Accuracy | 0.2% + 4. |
AC Currency Range | 0.1 μA to 10 A. |
AC Current Accuracy | 1.5% + 2. |
Resistance Range | 0.1 Ω to 50 MΩ. |
Display Counts | 6000. |
Capacitance | 1 nF to 9999 μF. |
Frequency | 0.5 Hz to 199.99 kHz. |
Compliance | CAT IV 600 V, CAT III 1000 V. |
IP Rating | IP67. |
Power | 3 x AA Batteries. |
Battery Life | 800 Hours. |
Mechanical/General Specifications | |
Display | Bar graph/backlight. |
Data Storage | Min/Max/Avg. |
Safety rating | CAT IV 600 V/CAT III 1000 V. |
Mine Safety | MSHA Approved. |
Drop test | 10 feet drop test. |
Dimensions (H x W x L) with holster | 6.35 x 10.0 x 19.81 cm (2.5 x 3.93 x 7.8 in). |
Weight with holster | 698.5 g (1.54 lb). |
Fluke 27II warranty | Limited lifetime. |
No customer reviews for the moment.
COMPONENT |
DESCRIPTION | PART No. | ||
C125 Case | Zippered carrying case with detachable external pouch. | 646858 | ||
C550 | Tool bag. Large zippered storage compartment with 25 pockets. | 1547919 | ||
AC285 | One pair (red, black) of large alligator clips with nickel-plated steel jaws. | 1610159 | ||
TL223-1 | TL223 SureGrip™ Electrical Test Lead Set. | 3971184 | ||
TL71-1 | Premium Test Lead Set. One pair (red, black) comfort grip probes with silicone insulated, right-angle test leads. | 3971207 | ||
i1010 | Fluke i1010 AC/DC current clamp (400 A). | 617735 | ||
i400 | Fluke i400 AC current clamp (1 A to 1000 A). | 617735 | ||
i400 | Fluke i400 AC current clamp (1 A to 1000 A). | 2277225 | ||
80K-15 | High Voltage Probe. 0 to 15kV DC or peak AC, 10kV rms AC. | 618113 |