loading spinner
  • Reduced price
Fluke FoodPro Food Safety Thermometer
  • Fluke FoodPro Food Safety Thermometer
  • Fluke FoodPro Food Safety Thermometer
  • Fluke FoodPro Food Safety Thermometer

Fluke FoodPro Food Safety Thermometer

Fluke authorised distributor and calibration house.

Includes: FoodPro thermometer, AA battery, Quick Start guide.

£72.80 Save 20%
Tax excluded
  HTTPS Secure

Our pages are encrypted and protected from cyber-attack.


Payment Card Industry Data Security Standard (PCI DSS) Compliant.


TLS (SSL) - all data/information is secure from interception.

The easy-to-use and highly accurate Fluke FoodPro non-contact thermometer instantly measures surface temperature, allowing users to make rapid and frequent non-contact temperature measurements without risk of cross contamination.

The Fluke FoodPro non-contact thermometer is the first line of defense against improper receiving, storage and holding temperatures. Using an infrared measurement technique, the highly accurate FoodPro quickly reads surface temperatures, allowing workers to make rapid and frequent temperature measurements – faster than contact units and without fear of cross contamination. The easy-to-see illumination light shows you the measurement area.

Both FoodPro Series thermometers are hand-washable and feature unique HACCP check lights, which immediately indicate safe or potentially unsafe holding temperatures with either green or red lights.


Infrared temperature range from -30 to 200 ºC.
HACCP check lights for instant recognition of safe/unsafe temperatures.
LED target illumination highlights the entire measurement spot for accurate targeting.
Hand washable (IP54 sealed).

Fluke FoodPro Specifications
Infrared Specifications
Temperature -30°C to 200°C.
Accuracy (Assumes ambient operating temperature of 23°C ±2°).
Between 0°C and 65°C: ±1°C.
Below 0°C: ±1° ±0.1 degree/degree.
Above 65°C: ±1.5% of reading.
Response time < 500 ms after initial reading.
Spectral response 8-14 microns.
Emissivity Pre-set for foodservice applications.
Distance to spot size/Optical Resolution (D:S) 2.5:1 @ 90% energy, typical.
Typical working range (target illumination) ≈25 mm to 250 mm.
Minimum target size 12 mm ø.
Illumination to IR channel offset 13 mm.
Operational Specifications
Repeatability Within accuracy specifications of the unit.
Ambient operating range 0°C to 50°C.
Relative humidity 90% (±5%) RH non condensing @ 30°C.
Storage temperature -20°C to 60°C.
Weight 100 g (with battery).
Dimensions 150 x 30 x50 mm.
Power, battery life 1 AA alkaline.
Battery Life Alkaline, 10 hours minimum @ 23°C.
Target illumination High brightness LED.
Display resolution 4 digits, 0.2°C.
Displayhold (7 seconds) Yes.
LCD backlit display No.
Temperature display 4 digits, 0.2°C resolution.
Maximum temperature displayed No.
Timer No.
Environmental data IP54 sealing (hand-washable, non-submersible).
Other Specifications
Standards Conforms to EN 61236-1 Electromagnetic Emissions and Susceptibility, EN 6101-1 General Safety, Sealing IP54 (hand washable, non-submersible).
Certifications CE NSF.
Fluke FoodPro warranty 2 years.
At calibration geometry of 279 mm with a 140 mm diameter, 0.97 emissivity blackbody. Specifications subject to change without notice.


Fluke FoodPro Datasheet

PDF Specifications of the Fluke FoodPro and FoodPro Plus Infrred Food Thermometers.

Download (624.32k)

No customer reviews for the moment.

Write your review

Fluke FoodPro Food Safety Thermometer

6 other products in the same category: