- Hamilton01698 829711
- Leeds0113 235 1356
- Belfast02890 830302
Megger CI Cable Identifier
Includes: Mains supply lead 2.0 m, Fused test lead 2.0 m with clamp (black0, Fused test lead 2.0 m with clamp (red), Earthing lead (1.5 m) with clamp, green/yellow, Case, Manual.
Clear identification of a cable before it is cut or fitted has huge safety implications. Any mistakes here can result in fatal consequences for the cable fitter and may cause outages for the connected customers. The Megger CI cable identification system has been developed to make this work much easier and safer.
The system consists of the current impulse generator and the receiver CI RX. This receiver is connected by (AZF 250-CI or AZF 150-CI) flex clamp for decoupling the identification signal. The pulse generator CI TX generates single sawtooth pulses with a peak current up to 100 A and transmits them into the cable being identified.
The current flow of these impulses causes an electromagnetic field with a defined polarity around the cable which is received with the flex coupler of the receiver CI RX, automatically synchronised and displayed by the LED scale. The only possible adjustment is the display sensitivity.
FEATURES
Inexpensive cable selection system.
Easy to operate.
Safe to operate.
Very small.
Transmitter for identification on de-energised cables CI TX | |
---|---|
Pulse voltage | 55 VDC. |
Pulse current | max. 100 A. |
Pulse sequence | 30/min. |
Pulse width | 72 ms |
Power supply | 100 ... 240 VAC; 50 / 60 Hz; 12 VDC rechargeable battery. |
Operating time | 4 h ion rechargeable battery. |
Charging time | 6 h. |
Protection class | IP54. |
Operating Temperature | -10 °C ... + 60 °C. |
Storage temperature | -10 °C ... + 60 °C. |
Dimensions | 201 x 120 x 80 mm. |
Weight | 1.6 kg. |
Universal-receiver CI RX | |
Sensor | Flex-Coupler Ø ca. 250 mm (inside 240 mm). |
Amplifier settings | 10 steps; 3 ... 24 dB. |
Power supply | 2 x 1.5 V AA batteries. |
Operating time | > 50 h. |
Protection class | IP54. |
Operating Temperature | -10 °C ... + 60 °C. |
Storage Temperature | -10 °C ... + 60 °C. |
Dimensions | 150 x 65 x 35 mm. |
Weight | 0.4 kg. |
No customer reviews for the moment.
COMPONENT | DESCRIPTION | PART No. | ||
Phase Sensor | Phase identification sensor. | 820014535 | ||
Lead Kit | Lead kit for CI Transmitter. | 128314893 | ||
Case | Transport case. | 90004532 | ||
Clamp 250 mm | Flexible clamp, 250 mm. | 820013107 | ||
Clamp 150 mm | Flexible clamp, 150 mm. | 820013106 |