loading spinner
Amprobe AT-6010 Advanced Wire Tracer
  • Amprobe AT-6010 Advanced Wire Tracer
  • Amprobe AT-6010 Advanced Wire Tracer
  • Amprobe AT-6010 Advanced Wire Tracer
  • Amprobe AT-6010 Advanced Wire Tracer

Amprobe AT-6010 Advanced Wire Tracer

beha-Amprobe Approved Distributor

Includes: AT-6010-R Receiver, AT-6010-T Transmitter, CC-6010 Soft Carrying Case, TL-6000-INTL Test Lead and Accessory Kit (2 x 1 m test leads, 1 x 7 m test lead, 2 x alligator clips, 2 x outlet blade adapters, 2 x outlet round adapters), 12 x AA Batteries, User Manual, Quick Reference Guide.

Tax excluded
  HTTPS Secure

Our pages are encrypted and protected from cyber-attack.


Payment Card Industry Data Security Standard (PCI DSS) Compliant.


TLS (SSL) - all data/information is secure from interception.

The Amprobe AT-6010 offers easy location of wires, breakers and fuses. The Transmitter is simplified for simple one button operation and features "High Signal" mode for normal circuits and "Loop" mode for closed loop de-energised circuits.

When the Transmitter is connected to the circuit, the Receiver easily detects the signal in the wires or cables behind walls, ceilings and floors. The Transmitter works on Energised and De-energised circuits up to 600 V AC/DC in Category I through Category III electrical environment.

This allows for work directly on an energised circuit without the need to take equipment offline. The Transmitter also features high signal mode for general tracing and a loop mode designed specifically for locating shorts, as well as two optimal tracing frequencies that are automatically activated based on the detected voltage.

Features & Functions

Trace energised and de-energised wires.
Identify breakers and fuses.
Connect to RCD-protected circuits.
Find breaks and opens.
Find shorts.
Trace wires in metal conduit.
Trace non-metallic pipes and conduit.
Trace shielded wires.
Trace underground wires.
Trace low voltage wires and data cables.
Sort bundled wires.
Map a circuit with test leads.
Trace breakers on system with light dimmers.
Signal clamp - closed loop circuits.
Signal clamp - mapping circuits.

Amprobe AT-6010 Advanced Wire Tracer Overview

Amprobe AT-6010 Advanced Wire Tracer Specifications
Features AT-6010-R Receiver AT-6010-T Transmitter
Measurement category CAT III 600 V.
Operating voltage/current 0 to 600 V.
Operating frequency Energised: 6.25 kHz.
Hazardous voltage detection N/A. > 30 V AC/DC.
Signal indications Numeric bar graph display and audible beep. LEDs.
Response time Tip Sensor (Energised/De-energised): 500 ms
Battery voltage monitoring: 5 sec.
Line voltage monitoring: 1 sec
Battery voltage monitoring: 5 sec.
Current output of signal (typical) N/A Energized circuit:
HI mode: 60 mA RMS
De-energized circuit:
HI mode: 130 mA RMS
Loop mode: 160 mA RMS.
Signal voltage output (nominal) N/A De-energized circuit:
HIGH: 33 V RMS, 140 Vp-p
With CT-400:
Loop model:
31 V RMS, 120 Vp-p.
Range detection (open air) Tip Sensor (Energised):
Max distance via air: up to 20 ft (6.1 m)
Pinpointing: approx. 1.97 in (5 cm)
Tip Sensor (De-energised):
Max distance via air: up to 14.7 ft (4.5 m)
Pinpointing: approx. 1.97 in (5 cm).
Display size LCD 2.5 in (6.35 cm). N/A.
Display dimensions (W x H) 1.45 x 1.93 in
(36.72 x 48.96 mm).
Display type Segment LCD. LEDs.
Display colour Black and white. Operating mode LEDs: red
Battery status LED: red.
Booting time < 3 sec. < 2 sec.
Backlight Yes. N/A.
Operating temperature -4 °F to 122 °F (-20 °C to 50 °C).
Operating humidity 45%: -4 °F to <50 °F (-20 °C to <10 °C)
95%: 50 °F to <86 °F (10 °C to <30 °C)
75%: 86 °F to <104 °F (30 °C to <40 °C)
45%: 104 °F to 122 °F (40 °C to 50 °C).
Storage temperature and humidity -4 °F to 158 °F (-20 °C to 70 °C), <95% RH.
Operating altitude 0 to 6561 ft (2000 m).
Transient protection N/A. 6.00 kV (1.2/50μS surge).
Pollution degree 2.
IP rating IP 52. IP 40.
Drop test 3.28 ft (1 m).
Power supply 4 x AA (alkaline). 8 x AA (alkaline).
Power consumption (typical) 70 mA. Hi mode: 70 mA
Loop mode with Clamp: 90 mA
Consumption without signal transmission: 10 mA.
Battery life Approx. 25 h. Hi mode: approx. 25 h
Loop mode: approx. 18 h.
Low battery indication Yes.
Fuse N/A. 1.6 A, 700 V, fast-acting,
Ø 6x32mm.
Dimensions (L x W x H) Approx. 7.2 x 2.95 x 1.69 in
(183 x 75 x 43 mm).
Approx. 7.2 x 3.66 x 1.97 in
(183 x 93 x 50 mm).
Weight Approx. 0.6 lb (0.27 kg). Approx. 1.25 lb (0.57 kg).
AT-6010 warranty One-year.


Amprobe AT-6010 Datasheet

PDF specifications of the Amprobe AT-6010 Advanced Wire Tracer Kit.

Download (1.15M)

No customer reviews for the moment.

Write your review

Amprobe AT-6010 Advanced Wire Tracer

16 other products in the same category:

Megger TDR1000/3P Megger TDR1000/3P
  • Reduced price

Megger TDR1000/3P

Price £900.00 Regular price £1,000.00 -10%