loading spinner
Megger EZ-THUMP12 Model V2
  • Megger EZ-THUMP12 Model V2
  • Megger EZ-THUMP12 Model V2
  • Megger EZ-THUMP12 Model V2

Megger EZ-THUMP12 Model V2

Megger approved distributor and service centre.

Includes: 6ft (1.8m) mains supply lead set, 15 ft (4.6 m) HV output and ground cables (yy = 15), Universal battery charger kit and EZ-Thump12 Instruction manual.

EZT12-15
SebaKMT
Call For Price

NB: This unit is the EZ-Thump 12 Version 2 - 500j with 15ft HV output and ground cables.

Order an EZ-Thump configured to your specific needs. To determine the catalog number, fill in the alpha characters with the corresponding numbers from the detailed options. Example: to order a 12-kV EZ-Thump with 15 ft output and ground cables, 14 mm male MC with vise grip cable termination, hand cart and sheath, request catalog number  EZT12 - 15 T2 C H. Please see the PDF Datasheet or the 'ordering information' image above.

The Megger EZ-Thump12 is the compact and light weight, battery or mains powered solution for the fault location in MV or LV cables. It presents the ideal supplement for a satellite-based concept in areas of lower distribution density and failure rate, where fast reaction, weight, size and economy are the driving factors. The system requires no adjustments and need only to be operated by a rotary encoder.

Due to the rugged yet portable enclosure, it are ideally suited either for use in a “satellite” fault locating concept for remote areas that may have less frequent faults, when ease of operation, light weight and economics are important, or for hard to access inner city locations.

On-board is a TDR with a 7.6 km range and arc reflection at 12 kV for pre-locating. For pinpointing,  EZ-Thump offers a surge energy of 500 J, d.c. testing for breakdown detection and insulation resistance measurement. The unit is operated from line or the internal battery. It can fit in the boot of a car, making it ideal for a flexible quick response fault finding strategy.

FEATURES

Compact, light and rugged field instruments.
Battery and AC line operation.
Automatic end-of-cable and fault locating.
4 kV or 12 kV output versions available.
Transflective colour display.
ARM® prelocation.
Fault pinpointing (Thumping).
Optional sectionalising software.

Megger EZ-Thump Product Video

Megger EZ-Thump Specifications
Testing
Output 0 - 4kV, 35mA DC (EZ-THUMP4)
0-12kV, 12mA DC (EZ-THUMP12).
Prelocation
TDR Range: 25000 ft (7.6km)
Sampling Rate: 100MHz
Resolution: 2.5ft @ 250 ft/fs
0.8m @ 80m / fs.
Arc Reflection 0 - 4kV or 0 - 12kV (model dependent).
Pinpoint Fault Location
Surge 0 - 4kV @ 500J (EZT4)
0 - 12kV @ 500J (EZT12).
Impulse Sequence 10 seconds
Single shot.
Display
Type 5.7" (14.48cm) transflective TFT Colour LCD - 640 x 480 pixels.
Memory
Trace Number 1000.
Interface
Port Type USB.
Cables/Terminations
Types 15ft (4.6m) HV flexible shielded cable with MC connector and hotline clamp
HV return with hotline clamp
15ft (4.6m) ground/earth cable with hotline clamp
6ft (1.8m) mains supply lead set (US/SCHUKO/UK).
Supply
Battery Internal 24V NiMH battery 5AH approx 30 mins or surge/thumping approx 3 hours recharge time
100-240V AC - 24V DC charger with connection lead set (US/SCHUKO/UK).
AC Line 100 - 230V AC ± 50/60Hz.
Safety
Functions Emergency stop
Key switch interlock
Auto time out.
Environmental
Operating Temperature -4 to 122°F (-20 to +50°C).
Storage Temperature -12 to 160°F (-25 to +70°C).
Ingress Protection
Rating IP54.
Physical
Weight 71lbs (32kgs).
Dimensions 14 x 11 x 21" (35.5 x 28 x 53.3cm).
EZ-Thump12 V2 warranty One-year.

Download

Megger EZ-Thump V2 Datasheet

PDF Specifications of the Megger EZ-Thump Portable Cable Fault Location System.

Download (206.66k)

No customer reviews for the moment.

Write your review

Megger EZ-THUMP12 Model V2

16 other products in the same category:

arrow_upward