- Hamilton01698 829711
- Leeds0113 235 1356
- Belfast02890 830302
Chauvin F407 Power Clamp
Includes: Chauvin F407 Harmonics clamp, 1 x red/black banana/banana leads, 1 x red/black crocodile clips, 1 x of red/black test probes, PC communication software, 1 multilingual operating manual carrying case.
The Chauvin F407 harmonics clamp can be clamped around a conductor with just one hand. With a measurement range up to 1500A, their ability to measure AC or DC currents and their exceptional jaw opening capacity, these clamps are ideal for use on switchboards in small or large industrial installations.
Equipped with a fast 12-bit TRMS digital acquisition system, F407 clamps offer particularly accurate measurements. Due to their large bandwidth and high crest factor, these clamps guarantee accurate measurements whatever the type of signal.
They are particularly comfortable to read because of their backlit LCD display, offering contrasts and a viewing angle which are unprecedented for this type of instrument.
Quick, Safe Implementation
Users select the required measurement with the rotary switch and then clamp the conductor or hook up their measurement leads. To obtain further details on the measurement in progress, all you have to do is press the corresponding function on the front panel: HOLD, Min/Max, etc.
Harmonics
By monitoring voltage and current harmonics, it is usually possible to determine which loads are polluting the electrical network. With the F407 clamp, the harmonics mode enables you to: determine the harmonic currents produced by non-linear loads, analyse the problems caused by these harmonics, depending on their order (heating of neutral, motors, etc.). THD measurement (THD-f and THD-r) can be used to quantify the harmonics present on the network.
Recording to detect even intermittent faults
This is an important advantage for technicians in the field. In the event of random faults, they no longer have to wait for them to occur: the paperless recorder function enables them to record the relevant parameters over time at a rate which they can define. The instrument automatically stores the average, minimum and maximum values in all the modes (voltage, current, power, etc.). All the parameters will be stored in the instrument’s memory. The programmable acquisition rate allows users to define the recording duration possible on the instrument. All the recordings will then be available as trend curves for analysis.
FUNCTIONS
Current measurement (AC/DC).
Measurement of inrush current / overcurrent (True-Inrush).
Voltage measurement (AC/DC).
Frequency measurement.
Measurement of harmonic distortion, total (THD) and order by order.
Continuity test with buzzer.
Resistance measurement.
Power (W, VA, var and PF) and Energy measurements.
Measurement of the Crest Factor (CF), the Displacement Power Factor (DPF), and RIPPLE.
Recording of data in memory, Wireless data transfer to a PC (by Bluetooth).
Clamping Diameter | 48 mm. |
Display | Backlit LCD. |
Resolution | 10,000 counts. |
Number of Values Displayed | 3. |
Type of Acquisition | TRMS (AC, AC+DC]/DC). |
Autorange | Yes. |
Automatic AC / DC detection | Yes. |
AC Current | |
AC Current Range | 0.25 to 1,000 A (1,500 A peak). |
DC Current Range | 0.25 to 1500 A. |
A AC+DC | 0.25 to 1500 A (1,500 A peak). |
Best Accuracy | 1% reading + 3 cts. |
AC/DC Voltage |
|
Range | 0.15 to 1,000 V. |
Frequency | |
Range | Current: 5.0 to 2000 Hz Voltage: 5.0 to 20.00 kHz. |
Resistance | |
Range | 0.1 to 99.99 kΩ. |
Open Circuit Voltage | ≤8 V. |
Measurement Current | ≤680 μA. |
Audible Continuity | |
Continuity Threshold | 40 Ω. |
Diode Test | No. |
Single-phase and total three-phase power values | |
Active power | 1 W to 1,000 kW. |
Reactive power | 1 var to 1,000 kvar. |
Apparent power | 1 VA to 1,00 kVA. |
FP / DPF | Yes/Yes. |
Harmonic analysis | Yes. |
THDf / THDr | Yes / Yes. |
Frequency analysis | 25th order. |
Phase rotation (2-wire method) | - |
General | |
Dimensions | 92 x 272 x 41 mm. |
Weight | 600 g. |
Chauvin F407 warranty | 3 years. |
No customer reviews for the moment.
COMPONENT PARTS | DESCRIPTION | PART No. | ||
Test leads | PVC moulded lead 1.5m DM4 -CM4 Cat4 1kV RD/BK. | P01295451Z | ||
Test Leads | Silicone moulded lead 1.5m DM4-CM4 Cat4 1kV. | P01295453Z | ||
Probes | Moulded test probe Cat4 1 kV RD/BK. | P01295454Z | ||
Probes | 2 PVC leads/test probes 1 5A 1.5m 1000V cat 4. | P01295455Z | ||
Croc Clips | Crocodile clip Cat4 1kV R D/BK. | P01295457Z |