Drummond G Clamp
The G Clamps clamp-on facility eliminates the need to drill the bus bar.
- done HTTPS SECURE: Our pages are encrypted and protected from cyber-attack.
- done COMPLIANT: Payment Card Industry Data Security Standard (PCI DSS) Compliant.
- done PROTECTED: by TLS (SSL) - all data/information is secure from interception.
The DRUMMOND G Clamp is a moulded insulated clamp-on connector designed to provide a direct connection to a rigid rectangular bus bar. A 4mm shrouded socket is provided in the fluted head of the moulded screw.
The insulated materials reduce the risk to the installer. To counter the effects of vibration, a spring-loaded contact pin ensures consistent electrical contact force that is independent of the clamp screw installed torque and a locking ring nut secures the clamp screw against loosening.
Available in Brown, Black, Grey and Blue. Please choose when ordering.
|Applied electrical contact force||40N +/- 5N.|
|Maximum working voltage||600 V AC.|
|Maximum working current||10 A.|
|NB: Suitable for rectangular bus bar ONLY. Not suitable for round conductor.|
|Minimum Bar width||20 mm.|
|Minimum bar thickness||4 mm.|
|Maximum bar thickness||26 mm.|
|Operating temperature||-15°C to 60°C ≤ 80% R.H.|
|Storage temperature||-15°C to 60°C ≤ 80% R.H.|
|Materials||Nylon 66, reinforced with 13% glass fibre.|
|Safety||Conforms to BS EN61010.|
|Installation Overvoltage Rating||CAT IV 600V.|
|Length behind bus bar||12 mm.|
|Length in front of bus bar||61mm (+ 35mm as minimum allowance for 4mm plug).|
|Height above top of bus bar||14mm.|
|Width||50mm for locking ring nut.|
No customer reviews for the moment.