loading spinner
Fluke 80K-40 High Voltage Probe
  • Fluke 80K-40 High Voltage Probe

Fluke 80K-40 High Voltage Probe

Fluke authorised distributor and calibration house.

A high voltage probe that allows a multimeter to measure up to 40,000V respectively. Intended for low energy applications only.

382846
£319.60
£383.52 Inc. VAT

The Fluke 80K-40 is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 volts peak AC or DC Overvoltage Category I. This means the probe can only be used to make measurements on energy limited circuits within equipment.

Examples include high voltage within televisions or photo copy machines. DO NOT use this probe to measure high voltages on power distribution systems. The probe provides high accuracy when used with a voltmeter having 10 Megohm input impedance.

The 80K-40 will achieve rated accuracy when used with a voltmeter (ac or dc) having an input impedance of 10 MΩ ± 1.0%.

Fluke 80K-40 Specifications
Voltage range1 1 kV to 40 kV dc or peak ac, 28 kV rms ac.
Input Resistance 1000 MΩ.
Division Ratio 1000: 1 (1000X attenuator)
Accuracy DC 20 kV to 35 kV: ±1% at 20°C to 30°C; add 1% at 10°C <20°C and >30°C to 45°C. (For total measurement accuracy add accuracy specification of voltmeter being used.)
0 kV to <20 kV and >35 kV to 40 kV: ±2%.
Accuracy AC 60 Hz, ±5%.
Safety Meets IEC 1010-2-031:1993, Type B, 40 kV dc or, peak ac, 28 kV rms ac, Overvoltage Category I (voltages derived from limited energy transformer).
1This probe is intended for low energy applications such as CRT and similar circuits.

No customer reviews for the moment.

Write your review

Fluke 80K-40 High Voltage Probe

16 other products in the same category:

arrow_upward