The Fluke 190-104 scopemeter combines the highest safety ratings and rugged portability with the high performance of a bench oscilloscope. Designed for plant maintenance engineers and technicians, these tough ScopeMeter® test tool go into harsh, dirty, and hazardous industrial conditions to test everything from micro-electronics to power electronics applications.
The Fluke 190-104 ScopeMeter is the one test tool you will reach for to tackle just about any troubleshooting task. They include a multimeter, TrendPlot™ and ScopeRecord™ roll paperless recorder modes and hands free operation with Connect-and-View™ triggering, and much more.
Conveniently switch from waveform analysis to precise multimeter measurements using the built in 5000 count digital multimeter. Measurement functions on the Fluke 190-104 include Vdc, Vac, Vac+dc, resistance, continuity and diode test. Measure current and temperature using suitable shunt, probe or adapter with wide range of scaling factors.
FEATURES
Four electrically isolated inputs. CAT III 1000V / CAT IV 600V safety rated. Choose from 60 MHz, 100MHz, 200MHz or 500MHz bandwidth models Fast sampling rate, up to 5GS/s with up to 200 ps resolution (Depending on model and channels used). Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details. Quad meter measurements via scope BNC inputs in 4 channel models. Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering. ScopeRecord roll mode, capture waveform sample data for up to 48 hours. TrendPlot, trend measurement readings for up to 22 days. Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s). IP-51 rated for dust and drip proof to withstand harsh environments. Isolated USB ports for memory devices and PC connectivity. Li-Ion battery for extended operating timespan.
Key Benefits of the Fluke 190 Series II Scopemeters
Fluke 190-104 Specifications
Bandwidth
100 MHz.
Number of channels
100 MHz: 4 channels.
Real-time sample rate
1.25 GS/s.
Inputs
4 scope plus DMM input.
Independently floating isolated inputs
Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground.
Timebase range
5 ns - 2 min/div.
Input sensitivity
2 mV-100 V/div.
Trigger types
Connect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle
Trigger Source
Any scope input channel.
Glitch capture
8 ns.
Scope measurements
Cursor: 7.
Automatic: 30.
Maximum record length
ScopeRecord mode: 30,000 pts.
Scope mode: 10,000 pts per input.
Persistence
Digital persistence giving analog oscilloscope-like waveform decay.
Waveform compare
Waveform reference with automatic Pass/Fail testing.
Environmental Specifications
Operating temperature
0 °C to 40 °C Including Batteries.
0 °C to 50 °C Excluding Batteries.
Storage temperature
-20 °C to +60 °C.
Operating altitude
Up to 2,000 m (6666 ft) for CAT IV 600 V, CAT III 1000 V.
Up to 3,000 m (10,000 ft) for CAT III 600 V, CAT II 1000 V.
Safety Specifications
Electrical safety
1,000 V CAT III/600 V CAT IV (EN61010-1).
Mechanical and General Specifications
Dimensions
270 x 190 x 70 mm.
Weight
2.2 kg.
Fluke 190-104 Warranty
3-years on main instrument, 1-year on accessories.
Li-Ion battery
BP291 4800 mAh battery up to 7 Hours included standard.
