loading spinner
  • Reduced price
Fluke 190-102 Two-channel 100 MHz Scopemeter
  • Fluke 190-102 Two-channel 100 MHz Scopemeter
  • Fluke 190-102 Two-channel 100 MHz Scopemeter
  • Fluke 190-102 Two-channel 100 MHz Scopemeter

Fluke 190-102/S c/w SCC-290 Kit

Fluke authorised distributor and calibration house.

Includes: All accessories with the Fluke 190-102 with SCC-290 kit included.

4025424
£3,682.00
£3,516.00 Save £199.20
Tax excluded
Quantity
  • done HTTPS SECURE: Our pages are encrypted and protected from cyber-attack.
  • done COMPLIANT: Payment Card Industry Data Security Standard (PCI DSS) Compliant.
  • done PROTECTED: by TLS (SSL) - all data/information is secure from interception.

Fluke gives you more diagnostic powers with the Fluke 190-102 Scopemeter. This dual-input 100MHz scopemeter is rated up to CAT IV 600V, this unit meets the the requirements of the most demanding applications, with independent isolated inputs that allow for low and high voltage measurements without the risk of accidental short circuits.

Designed for plant maintenance engineers and technicians, these tough ScopeMeter test tools go into harsh, dirty, and hazardous industrial conditions to test everything from micro-electronics to power electronics applications. The Fluke 190-102 ScopeMeter is the one test tool you will reach for to tackle just about any troubleshooting task. They include a multimeter, TrendPlot™ and ScopeRecord™ roll paperless recorder modes and hands free operation with Connect-and-View™ triggering, and much more.

Conveniently switch from waveform analysis to precise multimeter measurements using the built in 5000 count digital multimeter. Measurement functions include Vdc, Vac, Vac+dc, resistance, continuity and diode test. Measure current and temperature using suitable shunt, probe or adapter with wide range of scaling factors.

Two USB ports, electrically isolated from measurement input circuits offer you easy USB connectivity to a PC or USB memory devices. Store unlimited waveform, screen captures or instrument steups to a USB memory device. Connect to a PC USB interface to transfer and archive critical measurement data using FlukeView software for windows.

FEATURES

Two electrically isolated inputs.
CAT III 1000V / CAT IV 600V safety rated.
100 MHz bandwidth model.
1.25 GS/s.
Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details.
Dedicated 5000 Count digital multimeter.
Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering.
ScopeRecord roll mode, capture waveform sample data for up to 48 hours.
TrendPlot, trend measurement readings for up to 22 days.
Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s).
IP-51 rated for dust and drip proof to withstand harsh environments.
Isolated USB ports for memory devices and PC connectivity.

Key Benefits of the Fluke 190 Series II Scopemeters

Fluke 190-102 Specifications
Bandwidth 100 MHz.
Number of channels 100 MHz: 2 channels.
Real-time sample rate 1.25 GS/s.
Inputs 2 scope plus DMM input.
Independently floating isolated inputs Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground.
Timebase range 5 ns - 2 min/div.
Input sensitivity 2 mV-100 V/div.
Trigger types Connect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle.
Trigger source Any scope input channel, or external via DMM input.
Glitch capture 8 ns.
Scope measurements Cursor: 7.
Automatic: 30.
Maximum record length ScopeRecord mode: 30,000 pts.
Scope mode: 10,000 pts per input.
Persistence Digital persistence giving analog oscilloscope-like waveform decay.
Waveform compare Waveform reference with automatic Pass/Fail testing.
DMM Specification
Meter inputs (also used as External Trigger Input for the Oscilloscope Mode) 4 mm banana inputs, fully isolated from scope inputs and from scope ground.
Maximum resolution 5000 counts.
Measurements VDC, VAC rms, VAC + DC rms, Resistance, Continuity, Diode Test, Current (through clamp or shunt), Temperature °C or °F (using optional converter).
Memory 2 Channel.
Screen + Setup: 30.
Recording: 10.
Display 153 mm full color LCD with fast update rate.
Environmental Specifications
Operating temperature 0 °C to 40 °C Including Batteries.
0 °C to 50 °C Excluding Batteries.
Storage temperature -20 °C to +60 °C.
Operating altitude Up to 2,000 m (6666 ft) for CAT IV 600 V, CAT III 1000 V.
Up to 3,000 m (10,000 ft) for CAT III 600 V, CAT II 1000 V.
Safety Specifications
Electrical safety 1,000V CAT III/600V CAT IV (EN61010-1).
Mechanical and General Specifications
Dimensions 270 x 190 x 70 mm.
Weight 2.2 kg.
Fluke 190-102 Warranty 3-years on main instrument, 1-year on accessories.
Li-Ion battery BP290 2400 mAh Li-ion battery up to 4 hours included standard.

Download

Fluke 190 Series II Datasheet

PDF Specifications of the Fluke 190 Series II Scopemeters.

Download (883.15k)

No customer reviews for the moment.

Write your review

Fluke 190-102/S c/w SCC-290 Kit
COMPONENT
DESCRIPTION PART No.
BC190
Line Voltage Adapter / Battery Charger. Provides power cord operation and charging for ScopeMeter 190 Series test tool. 677390
MA190 The MA190 accessory set enables interconnection of the Fluke ScopeMeter 190 Series for use in the field of Medical Imaging and Video systems. 1567481
BP290 2400 mAh High Capacity Li-Ion Battery for Fluke 190-series II. 4025762
EBC290 External Battery Charger for BP290 and BP291. 3894906
C195 Zippered carrying case with storage compartments. 677408
C290 Hard Shell Protective Carrying Case for Fluke 190-series II. 3894803
HC200 Set of four Hook Clips (two red and two gray). 2086410
SW90W FlukeView ScopeMeter Software. For ScopeMeter 190 and 120 Series. 3894923
VPS410-II-G Industrial Voltage Probe-set, grey, 10:1, 500 MHz, 1000V CAT III, 600V CAT IV. 4276943
VPS410-II-R Industrial Voltage Probe-set, red, 10:1, 500 MHz, 1000V CAT III, 600V CAT IV. 4276928
TL175 TwistGuard™ Test Leads. 3521976

13 other products in the same category:

arrow_upward