- Reduced price
Fluke 190-062/S c/w SCC-290 Kit
Includes: All accessories for the 190-062 plus FlukeView Software for ScopeMeter (SW90W) and Carrying Case (C290) Kit.
- done HTTPS SECURE: Our pages are encrypted and protected from cyber-attack.
- done COMPLIANT: Payment Card Industry Data Security Standard (PCI DSS) Compliant.
- done PROTECTED: by TLS (SSL) - all data/information is secure from interception.
Fluke gives you more diagnostic powers with the Fluke 190-062 Scopemeter. This dual-input 60MHz scopemeter is rated up to CAT IV 600V, this unit meets the the requirements of the most demanding applications, with independent isolated inputs that allow for low and high voltage measurements without the risk of accidental short circuits.
Fluke ScopeMeter® 190-062 combines an unprecedented level of performance, ruggedness, and portability with 60MHz bandwidth and real-time sampling rates up to 625 MS/s and 200 ps resolution to capture noise and other disturbances.
This model feature deep memory up to 10,000 samples per channel; so you can examine very small parts of the waveform in detail, and it is IP-51 rated to withstand dust, drips, humidity, and wide temperature variations.
Two electrically isolated inputs.
CAT III 1000V / CAT IV 600V safety rated.
60 MHz bandwidth.
Real-time sample rate: 625 MS/s.
Dedicated 5000 Count digital multimeter.
Inputs: 2x BNC input plus 1x DMM input.
Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s).
|Number of channels||60 MHz: 2 channels.|
|Real-time sample rate||625 MS/s.|
|Inputs||2 scope plus DMM input.|
|Independently floating isolated inputs||Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground.|
|Timebase range||10 ns - 2 min/div.|
|Input sensitivity||2 mV-100 V/div.|
|Trigger types||Connect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle.|
|Trigger source||Any scope input channel, or external via DMM input.|
|Glitch capture||8 ns.|
|Scope measurements||Cursor: 7.|
|Maximum record length||ScopeRecord mode: 30,000 pts.|
|Scope mode: 10,000 pts per input.|
|Persistence||Digital persistence giving analog oscilloscope-like waveform decay.|
|Waveform compare||Waveform reference with automatic Pass/Fail testing.|
|Meter inputs (also used as External Trigger Input for the Oscilloscope Mode)||4 mm banana inputs, fully isolated from scope inputs and from scope ground.|
|Maximum resolution||5000 counts.|
|Measurements||VDC, VAC rms, VAC + DC rms, Resistance, Continuity, Diode Test, Current (through clamp or shunt), Temperature °C or °F (using optional converter).|
|Screen + Setup: 30.|
|Display||153 mm full colour LCD with fast update rate.|
|Operating temperature||0°C to 40°C Including Batteries.|
|0°C to 50°C Excluding Batteries.|
|Storage temperature||-20°C to +60°C.|
|Operating altitude||Up to 2,000 m (6666 ft) for CAT IV 600 V, CAT III 1000 V.|
|Up to 3,000 m (10,000 ft) for CAT III 600 V, CAT II 1000 V.|
|Electrical safety||1,000 V CAT III/600 V CAT IV (EN61010-1).|
|Mechanical and General Specifications|
|Size||270 x 190 x 70 mm.|
|Fluke 190-062 Warranty||3-years on main instrument, 1-year on accessories.|
|Li-Ion battery||BP290 2400 mAh Li-ion battery up to 4 hours included standard.|
No customer reviews for the moment.
||Line Voltage Adapter / Battery Charger. Provides power cord operation and charging for ScopeMeter 190 Series test tool.||677390|
|MA190||The MA190 accessory set enables interconnection of the Fluke ScopeMeter 190 Series for use in the field of Medical Imaging and Video systems.||1567481|
|BP290||2400 mAh High Capacity Li-Ion Battery for Fluke 190-series II.||4025762|
|EBC290||External Battery Charger for BP290 and BP291.||3894906|
|C195||Zippered carrying case with storage compartments.||677408|
|C290||Hard Shell Protective Carrying Case for Fluke 190-series II.||3894803|
|HC200||Set of four Hook Clips (two red and two gray).||2086410|
|SW90W||FlukeView ScopeMeter Software. For ScopeMeter 190 and 120 Series.||3894923|
|VPS410-II-G||Industrial Voltage Probe-set, grey, 10:1, 500 MHz, 1000V CAT III, 600V CAT IV.||4276943|
|VPS410-II-R||Industrial Voltage Probe-set, red, 10:1, 500 MHz, 1000V CAT III, 600V CAT IV.||4276928|
|TL175||TwistGuard™ Test Leads.||3521976|