- Hamilton01698 829711
- Leeds0113 235 1356
- Belfast02890 830302
Drummond MTL10PD Test Lamp and Proving Device
This handy bundle contains a Drummond MTL10 test lamp and a PD440 proving device. The proving device can be used to verify the functioning of the test lamp.
The Martindale MTL10PD contains the Drummond MTL10 test lamp and the PD440 proving device, enabling you to comply with health and safety recommendations for safe working. It is an essential aid for electricians and comes with a carry case (TC69). The PD440 proving device can be used to verify the functioning of the test lamp.
Drummond MTL10 Specifications
Electrical | |||
Maximum working voltage | 500V AC, 750V DC. | ||
Nominal voltage threshold indications | 50, 120, 230, 400 V AC/DC. | ||
Nominal voltage threshold tolerance | Conforms to BS EN 61243-3:2010. | ||
Range detection. | Automatic. | ||
Response time | <0.1s. | ||
Frequency range | DC, 40 - 65 Hz. | ||
Duty ratio | 30s ON (operated) / 240s OFF (recovery) | ||
Environmental | |||
Temperature (Operating & Storage) | -10°C to 55°C. | ||
Humidity (Operating & Storage) | ≤ 85% R.H | ||
Safety | |||
Pollution degree | 2. | ||
Conforms | BS EN 61243-3 CAT IV 600V, CAT III 1000V. | ||
IP Rating | IP64. | ||
EMC | Conforms to BS EN 61326-1. | ||
General Specifications | |||
Power | from circuit under test. | ||
Dimensions | 213(L) x 112(W) x 72(D) mm. | ||
Weight (packed) | 320g approx. | ||
Drummond MTL10 warranty | 2 years. |
Martindale PD440 Specifications
Electrical | |||
Output voltage | 440 V nominal. | ||
Operating temperature | -10°C to +40°C at max 70% RH. | ||
Battery | 6 x LR6 / MN1500 1.5V alkaline batteries or equivalent. | ||
Dimensions | 143 x 84 x 50 mm. | ||
Weight | 400g approx including battery. |
No customer reviews for the moment.
6 other products in the same category:
arrow_upward