- Hamilton01698 829711
- Leeds0113 235 1356
- Belfast02890 830302
Kewtech KEW8035 Non-contact Phase Rotation Tester
Includes: KEW8035 phase indicator, Carrying case, Alkaline battery (LR6) x4, Instruction manual.
The Kewtech KEW 8035 is a Phase indicator and can indicate a presence of live line and phase sequence with the equipped LED and Buzzer while clipping the 3-phase line over the jacket of a conductor. A magnet on the backside of the instrument can fix the instrument onto the distribution board and enables safety and easy measurements.
The Electricity at Work Act says that live testing must only be undertaken when there is no alternative. This contactless phase rotation meter eliminates the need to expose live conductors. Not only is it safer, but it saves time as panels do not have to be opened and then made safe. Superbright LEDs also make the indication clear.
FEATURES
Permits safe testing, without the need of direct contact between probes and live wires.
The insulated crocodile clips can clip insulated cables from ø2.4 to 30mm.
Phase rotation is indicated by the rotary illumination of LEDs and logical audible tones.
The instrument can be fixed to a metal panel via the magnet on the back side.
Wide measuring range for 3 phase installations from 70V to 1000V AC.
Complies with IEC61010-1 CAT.IV 600V and CAT.III 1000V.
Measurement principle | Static induction. | ||
Functions | Phase rotation (Clockwise or Counter Clockwise), Presence of open phase. | ||
Operating Conditions | Temperature/Humidity Ranges -10 to 50°C, 80% (no condensation). | ||
Voltage range | 3-phase AC 70 - 1000 V (voltage to earth, continuous sine wave). | ||
Frequency range | 45 to 66 Hz. | ||
Visual Indication | Via LEDs with Super brightness function. | ||
Conductor size | External diameter of the covered conductor Dia.2.4 to 30 mm. | ||
Auto-power-off | 10 min after powering on the instrument. | ||
Power source | DC 6 V (size AA alkaline battery LR6 or equivalent 1.5V AA × 4pcs). | ||
Test Leads | Double insulated cables approx 70cm. | ||
Low battery warning | Power LED flashes. | ||
Continuous use | approx 100 hours. | ||
Dust-proof | IP40 (IEC60529). | ||
Applicable Standards | IEC 61010-1 CAT.IV 600V, CAT.III 1000V Pollution degree2, IEC 61557-1, -7. | ||
Dimensions | 112(L) × 61(W) × 36(D)mm. | ||
Boxed weight | Approx 380g (batteries included). | ||
Kewtech KEW8031F warranty | 2 year. |
No customer reviews for the moment.