- Hamilton01698 829711
- Leeds0113 235 1356
- Belfast02890 830302
Sofamel SGM-25 T10 Insulated Composite Gloves
Sofamel SGM-10 dielectric composite gloves and arc flash.
The Sofamel SGM-25 T10 dielectric composite gloves allow working in total safety without leather overgloves. Innovation in the used raw material gives the gloves suppleness despite the required thickness to protect against the mechanical hazards. Furthermore, the composition of the outer coated provides gloves with an exceptional grip even in wet conditions. Accordes to EN 60903 and IEC 60903 Standards.
This is a thick, smooth glove designed to enable electricians to work in comfort, even when handling very small parts.
Meaning of letters in ‘Categories’: A: Acid / Z: Ozone / H: Oil / C: Very low temperature / R: A+Z+H resistance. Also available in size 9. Please state size required when ordering.
Size | 10. | ||
Class | 00. | ||
Length | 360 mm. | ||
Categories | R & C. | ||
Working voltage | 5000 V AC. | ||
Proof Test Voltage max | 2500 V AC. | ||
Withstand Voltage max | 5000 V AC. | ||
Outside Finishing | Grip on palm and fingers. | ||
Inside Finishing | Chlorinated. | ||
Average tensile strength | 16 MPa. | ||
Average elongation at break | 600%. | ||
Tension set | 15%. | ||
Resistance to cutting | >2.5 (equivalent to level 2 according to EN 388). | ||
Resistance to abrasion | 0.05 mg/t. | ||
Tearing resistance | >25 N (equivalent to level 2 according to EN 388). | ||
Resistance to penetration | >60 N (equivalent to level 2 according to EN 388). | ||
Resistance to low temperature | conditioning of gloves for 1 hour at -25 (3°C). | ||
Flame-retardant test | Application of a flame for 10 seconds at a finger tip. |
No customer reviews for the moment.