- Hamilton01698 829711
- Leeds0113 235 1356
- Belfast02890 830302
Chauvin C.A 6292 200A Micro-Ohmmeter
Includes: mains cable, 1 set of 2 Kelvin leads 6m long (red / black) with adjustable-clamp connections, green earth/ground lead 3m long terminated by a crocodile clip, USB A/B cable 1.5 m long, user manual on CD-ROM (1 file per language), Quick Start Guide, CD-ROM containing the MOT and DataView® software, multilingual safety datasheet.
The Chauvin Arnoux C.A 6292 micro-ohmmeter is a portable measuring instrument supplied in a rugged, waterproof site case. Its clearly-identified connection terminals limit the risk of errors and allow quick connection of the measurement leads. The measurement results are displayed instantaneously on the backlit LCD screen for easy reading. The C.A 6292 can be configured directly using the rotary knob on the instrument or via a PC by means of the USB link.
The C.A 6292 can be used to measure in total safety for both people and equipment. The BSG method allows you to maintain the earthing on both sides of the object tested in order to remove any risk due to electromagnetic induction phenomena. In this mode, the optional MR 6292 clamp can be used for current measurements up to 50 ADC.
The instrument uses the four-wire measurement method based on Kelvin’s principle to eliminate errors due to the resistances of the test leads and to the contact resistances. This makes the measurements very accurate.
FEATURES
Perform tests normally or with both sides of the switch gear connected to the ground.
Four languages available through user selection.
Cooling system to improve the number of sequential tests that can be performed.
Programmable Test Duration to 120 seconds.
Direct viewing of stored tests on the instruments display.
Programmable and manual test current selection.
Accurately measures low contact resistances with test currents up to 200A.
Measures resistances up to 1Ω.
Low resolution of 0.1µΩ.
Large LCD digital display.
Stores up to 8000 test results.
USB communication interface.
Direct printout using DataView® software and a PC.
Rugged, light-weight and water-resistant case.
Test current | Programmable from approx. 20 A to 200 A. | ||
Resistance | 0.1 μΩ to 2 mΩ 2 to 200 mΩ 200 mΩ to 1 Ω. |
||
Resolution | 0.1 μΩ (200 A max) 10 μΩ (25 A max to 200 mΩ) 1 mΩ (5 A max to 1 Ω). |
||
Accuracy |
± 1% from 50 μΩ to 1 Ω.
|
||
Output voltage |
110 Vac: 4.2 V @ 200 A
220 Vac: 8.6 V @ 200 A.
|
||
Maximum load resistance |
110 Vac: 20 mΩ @ 200 A
220 Vac: 42 mΩ @ 200 A.
|
||
Measurement method | 4 Kelvin-type connection terminals. | ||
Test mode | Normal or BSG (Both Sides Grounded). | ||
Test duration | Adjustable from 5 to 120s @200 A / unlimited up to 100 A. | ||
Data storage | Up to 8,000 measurement results. | ||
Interface | USB 2.0. | ||
Software | DataView®. | ||
Power supply |
100 to 240 Vac – 50/60 Hz.
|
||
Operating temperature | 0 °C to +55 °C. | ||
Storage temperature | -10 °C to +70 °C. | ||
Humidity | 95% RH. | ||
Protection | Protected against voltage surges, short-circuits, overheating and overvoltages on the output terminals. | ||
Ingress protection | IP54. | ||
Electrical safety | IEC 61010-1. | ||
Dimensions | 502 x 394 x 190 mm. | ||
Weight | approximately 13kg for the instrument and 9kg for the accessory carrying case. | ||
Chauvin C.A6292 warranty | 12 months. |
No customer reviews for the moment.
COMPONENT |
DESCRIPTION | PART No. | ||
Kelvin leads | Set of 2 Kelvin leads 15 m long (red / black) with adjustable-clamp connections. | P01295487 | ||
Clampmeter | MR 6292 current clamp for C.A 6292. | P01120470 | ||
Earth lead | Green earth/ground lead with crocodile clip. | P01295488 | ||
USB cable | USB-A USB-B cable 1.5m long. | P01295293 | ||
Kelvin clamps | 200A Kelvin Clamps 6m x 2. | P01295486 |