- Hamilton01698 829711
- Leeds0113 235 1356
- Belfast02890 830302
Martindale TEK300 20mA Loop Calibrator
The TEK300 handheld unit is fully portable and has a large 3.5 digit LCD display, with overload protection for extra safety.
The Martindale TEK300 current calibrator is able to sink orsource a current up to 20mA. It is intended for process control instrumentation and general purpose signal injection applications.
A monitor mode facility is also incorporated into the design, whereby the current (0-20mA) in the process loop can be monitored and read directly from the digital display. The device is also fully protected against inadvertent misuse. This low cost unit offers an exceptional value for moneymeans of delivering and measuring 0 - 20mA currents. This makes it ideal for cost effective application in testing, calibrating and troubleshooting in a wide range of process control environments.
FEATURES
Sink, Source & Monitor modes.
Low cost current calibrator.
Resolution of 10 uA.
0 - 20 mA Current Range.
Supply | 2 x 9 V alkaline batteries, MN1604 or equivalent (included). |
DC/DC Converter Output | 28.5 V (+0.1 V). |
Current Range | 0 - 20 mA F.S. (+0.1%). |
Resolution | 10 μA. |
Temperature Drift | 150 ppm.°C. |
Linearity | +0.15%. |
Output Noise (Typically) | 4 mV p/p. |
Indicators | LED (green) - battery OK LED (red) - output error. |
Display | 3½ digit LCD. |
Output Connectors | 4mm terminal posts (19.05 mm apart). |
Operating Temperature | 0 - 50°C. |
Case | Light grey ABS hand held, supplied with stand. |
Dimensions | 180 x 100 x 44 mm. |
Weight | 380g |
Fuse | 50 mA. |
Martindale TEK300 warranty | Two-years. |
No customer reviews for the moment.