- Hamilton01698 829711
- Leeds0113 235 1356
- Belfast02890 830302
Megger KF-LAB MkII Test Set
Includes: Titration Vessel, Detector electrode, Generator electrode, Drying tube, Carrying Case, Power Pack, Car adapter, Injection septa (10), Glass syringe (1 ml), Luer needle, Bottle of Molecular sieve, Stirrer bar, Funnel.
Over 20 years experience has led to the development of the Megger KF875 and KF-LAB MkII Coulometric Karl Fischer Test Sets designed to determine moisture in oil, to provide highly accurate results on-site.
The Megger KF-LAB MkII allows the titration of samples with a range of specific gravities from 0.60 to 1.40 and also permits the use of different sample sizes. The KF-LAB MkII also has a default setting optimized for analyzing insulating oils with an SG of 0.875. This means it can be used to measure water content in a variety of different materials but is also easy to set up for transformer insulating oils.
The unit eliminates inaccuracies with ACE Control System - some Coulometric Karl Fischer sets are susceptible to inaccuracies due to changes in electrolysis cell resistance, which requires frequent checking of the titrator efficiency by analyzing known water content standards. The KF875 and the KF-LAB MkII remove this need by using the patent pending ACE (Automatically Compensated Errors) Control System. This guarantees that the electrolysis current produced and the count rate displayed are always correctly synchronised, regardless of changes to the electrolysis cell resistance.
The printer may be disabled if not required and results can be calculated in ppm, mg/kg, % and micrograms. For extra flexibility, the results may be calculated based on the weight of the sample or based on the volume and specific gravity of the sample.
TECHNICAL SPECIFICATIONS
Coulometric Karl Fischer titrimetry.
Highly portable and designed specifically for outdoor use.
Using the ACE (Automatically Compensated Errors) Control System.
May be powered by internal rechargeable batteries or from the supply.
Includes free data capture and retrival software.
Titration method | Coulometric Karl Fischer Titration. | ||
Electrolysis control | Patented “ACE” control system. | ||
Vessels | 400 ml (standard). | ||
End point detection | AC polarisation. | ||
End point indication | Visual display/ print out/ acoustic beep. | ||
Type of sensor | Two pin platinum electrode. | ||
Measuring range | 1 μg - 10 mg water. | ||
Moisture range | 1 ppm - 100%. | ||
Max. sensitivity | 0.1 μg. | ||
Max. titration speed | 2 mg per minute. | ||
Max. current | 400 ma. | ||
Drift compensation | Automatically controlled. | ||
Precision | 10-100 μg ±3 μg, 100 μg - 1 mg ±5 μg, above 1 mg ±0.5%. | ||
Method storage | 10 programmable methods. | ||
Sample ID number | User programmable. | ||
Display format | μg, mg/kg, ppm, %. | ||
Analogue output | Built-in printer. | ||
Print format | μg + mg/kg, ppm, %. | ||
Data logging | USB, RS232 and results manager software. | ||
Calculation modes | Weight/weight, Weight/dilution ratio, Volume/volume, Volume/density, User programmable. | ||
Statistics | Up to 99 runs, User programmable. | ||
Start delay time | 0-30 mins. selectable. | ||
Stirrer speed | Microprocessor controlled. | ||
Calendar / clock | Analysis time & date print out. | ||
Keypad/user controls | Non tactile membrane/display prompted menu. | ||
Display | 40 character alphanumeric backlit display. | ||
Printer | 42 character high speed thermal printer. | ||
Carry case | Standard. | ||
Power supply | 90-264 VAC, 47-63 Hz 12 V DC car adapter/internal battery. | ||
Battery life | 8 hours running time. | ||
Battery charging | 14 hours after average use. | ||
Battery low | Display & print out indication. | ||
Dimensions | 250 x 245 x 120 mm. | ||
Weight | 3 kg (without carry case). | ||
Megger KF-LAB Warranty | 1 year. |
No customer reviews for the moment.
Accessories | |||
Supplied Accessories (also available as spare items) | Order Code | ||
Titration Vessel | 6121-527 | ||
Detector electrode | 6121-528 | ||
Generator electrode | 6121-529 | ||
Drying tube | 6121-530 | ||
Carrying Case | 6121-537 | ||
Power Pack | 6121-585 | ||
Car adapter | 6121-539 | ||
Injection septa (10) | 6121-531 | ||
Glass syringe (1 ml) | 6121-532 | ||
Luer needle | 6121-533 | ||
Bottle of Molecular sieve | 6121-534 | ||
Stirrer bar | 6121-535 | ||
Funnel | 6121-536 |