loading spinner
Fluke 717-100G Pressure Calibrator
  • Fluke 717-100G Pressure Calibrator

Fluke 717-100G Pressure Calibrator

Fluke Approved distributor and certified product specialist

lead time   Lead Time Approx. 7-14 Days.


Includes: Fluke 717-100g, Protective Yellow Holster with test lead storage, Instructions Sheet (14 languages), single 9V alkaline battery, Test Leads and Alligator Clips, NIST-traceable calibration report and data.

1630430
£1547.00
£1856.4 Inc. VAT

The Fluke 717 Pressure Calibrator delivers outstanding performance, durability and reliability. The calibrator is compact, lightweight, and easy to carry. With a push button interface similar to the multifunction Fluke 750 Series Documenting Process Calibrators, the Fluke 717 Pressure Calibrator is easy to use.

It is EMI tolerant, dust and splash resistant, and features a removable battery door for quick battery changes. The Fluke 717 Pressure Calibrator is compatible with Fluke 700Pxx differential, gauge and absolute pressure modules to increase functionality.

FEATURES:

Measure pressure, 0.05% of full scale with internal sensor.
Measure mA with 0.015% accuracy and 0.001 mA resolution, while sourcing 24 V loop power
Measure pressure to 10,000 psi/700 bar using one of 29 Fluke 700Pxx Pressure Modules.
1/8 NPT female pressure fitting.
Compatible with non-corrosive Gases and liquids.
Select eleven different engineering units.
Zero, min, max, and hold functions.
Calibrate P/I instruments with simultaneous pressure and current measurement.
Pressure switch test function captures set, reset and Deadband values of a pressure switch.
Error % calculation of mA measurements for quick pass-fail decisions.
Long lasting battery life.
Holster features test lead storage.
Compatible with Toolpack magnetic hanging system.
New switch test.

Fluke 717 Specifications
Measurement Accuracy
Pressure Fluke 717 Series
Measure Pressure (Internal sensor).
Accuracy 0.05% full scale.
Functions Zero, min, max, hold, damp.
Note gasses / liquids (non-corrosive).
Fluke 717 1G
Range -1 to 1 psi, (-68.9 mbar to 68.9 mbar, -83 to 6.89 kPa).
Resolution 0.0001 psi, 0.001 mbar, 0.0001 kPa.
Over pressure 5 x full scale.
Fluke 717 30G
Range -12 to 30 psi, (-850 mbar to 2 bar, -83 to 206.84 kPa).
Resolution 0.001 psi, 0.1 mbar, 0.01 kPa.
Over Pressure 2 x full scale.
Fluke 717 100G
Range -12 to 100 psi, (-850 mbar to 7 bar, -83 to 689.48 kPa).
Resolution 0.01 psi, 0.1 mbar, 0.01 kPa.
Over pressure 2 x full scale.
Fluke 717 300G
Range -12 to 300 psi, (-850 mbar to 20 bar, -83 to 2068.42 kPa).
Resolution 0.01 psi, 1 mbar, 0.1 kPa.
Over pressure 375 psi, 25 bar.
Fluke 717 500G
Range 0 to 500 psi, (0 mbar to 34,7 bar, 0 to 3447.38 kPa).
Resolution 0.01 psi, 1 mbar, 0.1 kPa.
Over pressure 2 x full scale.
Fluke 717 1000G
Range 0 to 1000 psi, (0 mbar to 69 bar, 0 to 6894.76 kPa).
Resolution 0.1 psi, 1 mbar, 0.1 kPa.
Over pressure 2 x full scale.
Fluke 717 1500G
Range 0 to 1500 psi, (0 bar to 103.4 bar, 0 to 10342 kPa).
Resolution 0.1 psi, 0.01 mbar, 1 kPa.
Over pressure 2 x full scale.
Fluke 717 3000G
Range 0 to 3000 psi, (0 bar to 207 bar, 0 to 20684.27 kPa).
Resolution 0.1 psi, 0.01 bar, 1 kPa.
Over pressure 2 x full scale.
Fluke 717 5000G
Range 0 to 5000 psi, (0 bar to 345 bar, 0 to 34474 kPa).
Resolution 0.1 psi, 0.01 bar, 1 kPa.
Over pressure 2 x full scale.
Fluke 717 Series with Pressure Modules
Measure pressure (Via pressure module connector using optional Pressure Modules).
Range 29 pressure modules, 0-1 inH20 to 10,000 psi, 2.5 mbar to 700 bar ranges. Over pressure per pressure module specs.
Resolution Per pressure module specs.
Accuracy Per pressure module specs.
Functions Zero, min, max, hold, damp.
Current Range 0 to 24 mA (-25% to 125%).
Resolution 0.001 mA.
Accuracy 0.015% + 2 counts.
Specifications
Loop power Range 24 V DC.
Accuracy ±10%.
Drive; 20 mA into 1000 ohms for battery > 6.8 V; 700 W for battery 5.8 to 6.8 V.
Display Clear 5 digit LCD.
Environmental Specifications
Operating temperature -10°C to 55°C.
Storage temperature -40°C to 60°C.
Humidity (without condensation) 95% (10°C to 30°C).
75% (30°C to 40°C).
45% (40°C to 50°C).
35% (50°C to 55°C).
Operating altitude 3,000 M max.
Safety Specifications
Safety CSA C22.2 No. 1010.11992.
Mechanical and General Specifications
Size (L x W x H) 201 x 98 x 52 mm (7.93 x 3.86 x 2.06 in).
Weight 22 oz, approximately 600 G with holster.
Fluke 717 warranty 3 years.
Shock and vibration Random, 2 G, 5-500 Hz.
1 m drop test.
Battery type Single 9 V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline.

Download

Fluke 717, 718 & 718Ex Datasheet

PDF Specifications of the Fluke 717, Fluke 718 & Fluke 718Ex Pressure Calibrators.

Download (265.42k)

No customer reviews for the moment.

Write your review

Fluke 717-100G Pressure Calibrator
COMPONENT
DESCRIPTION PART No.
C90 Soft meter case. 466029
C25 The C25 carrying case is a durable, zippered carrying case with padding and inside pocket, and high quality polyester exterior. 1281997
AC220 SureGrip™ Alligator Clip Set. 1610103
AC258 SureGrip Aligator Clips. 1610159
700PRV-1 Fluke 700PRV Pressure Relief Valve Kit. 2811808
700HTH-1 The Fluke 700HTH-1 hydraulic test hose allows connection to both a Fluke pressure module and a calibration unit under test from a Fluke 700HTP-1 hydraulic test pump simultaneously. 2811795
700PMP Hand-operated pressure pump to provide pressures up to 150 psi/1000 kPa. 617131
700HTP-2 Hydraulic test pump, 690 bar. 4096855
TL220-1 SureGrip™ Industrial Test Lead Set designed to provide a reliable grip in slippery hands. With interchangeable test lead set for multiple electrical applications. 3971178
TL71-1 The TL71-1 Premium Test Lead Set has one pair of red and black comfort grip probes with flexible silicone-insulated, right-angle test leads.. 3971207

16 other products in the same category:

arrow_upward