Druck DPI615HC 135 Bar SG Portable Hydraulic Pressure Calibrator

Druck Products

GE Druck Approved distributor and service company.

The Druck DPI615, with data storage and RS232 interface, reduces calibration times and eliminates data recording errors.

More details

I615HC135

New

£ 3,553.00 rrp £ 3,741.00

Save £ 188.00

(£ 4,263.60 inc VAT.)

Add to wishlist

Please Note: In December 2015 GE Druck announced that with the launch of the DPI 612 hFlexPro hydraulic calibrator the DPI 610 HC and DPI 615 HC models are being phased out. No orders will be accepted for these models after the end of 2015.

View the Druck DPI612 Flex here

View the Druck DPI611 here

The rugged weatherproof design of the dpi 615 calibrator is styled such that the pressure pump can be operated and test leads connected without compromising the visibility of the large dual parameter display. The mA step and ramp outputs and a built-in continuity tester extend the capabilities to include the commissioning and maintenance of control loops.

The hydraulic calibrator version provide manual generation of hydraulic pressure and consist of a screw-press druck dpi 615 HC rs232 connector.with a priming pump and isolation valve. The internal hydraulic parts are brass, stainless steel, copper, nylon and fluorocarbon rubber (viton0. The hydraulic fluid can be either de-mineralised water or one of the recommended hydraulic fluids (see manual).

The electrical connections on the front of the dpi615 HC enable the instrument to measure ±50 volts d.c. and ±55 mA and produce 10 volts d.c. or 24 volts d.c. and a maximum of 24 mA. An integral sensor provides measurement of ambient temperature. Additional sensors (option B1) connect to an external connector and extend the pressure measurement range and include differential pressure measurement.

The instrument has a RS232 connector to enable uploading of test data to a compatible documenting system.

FEATURES:

Sensor: 135 bar sealed gauge.
Priming Pump: M5 female feed port.
Shut-off Valve: Open for system priming.
Screw Press: 0 to 400 bar capability.
Pressure Port: G 1/8 female.
Media: Demineralized water and most hydraulic oils.
RS232 connector.

DPI615 Specifications:

  • Voltage inputs: ±50V.
  • Accuracy: ±0.05% rdg, ±0.004% F.S.
  • Voltage outputs range ±10V: accuracy ±0.1%, load 10 mA.
  • Voltage outputs range ±24V: accuracy ±5%, load 26 mA.
  • Current inputs range: ±55 mA, accuracy ±0.05% rdg, ±0.004% F.S.
  • Current output range: 24 mA, accuracy ±0.05% rdg, ±0.01% F.S.
  • Display: 60 x 60 mm (2.36" x 2.36") LCD graphics.
  • Reading: ±99999, update rate 2/readings/sec.
  • Operating temperature: -10°C to 50°C (+14°F to 122°F).
  • Sealing: IP54 (NEMA 4).
  • Power: 6 x 1.5V C cells, alkaline.
  • Battery life: Up to 60 hours nominal use at 20° C.
  • Dimensions: 300 x 170 x 140 mm (11.8" x 6.7" x 5.5").
  • Weight: 3kg (6.6lb).
  • DPI 615 HC Warranty: 1 year.

Includes: DPI615/HC, carrying case, test leads, 250 ml polypropylene fluid container and priming tube, user guide and calibration certificate with data

DPI610/615 Models Druck DPI615 HC

Write a review

Druck DPI615HC 135 Bar SG Portable Hydraulic Pressure Calibrator