- Hamilton01698 829711
- Leeds0113 235 1356
- Belfast02890 830302
Fluke i1010 AC/DC Current Clamp Kit
The Fluke i1010 is highly reliable, measures 1 A to 1000 A and provides accurate current reading without breaking the circuit.
Fluke current clamps extend the current ranges of Fluke tools. The Fluke i1010 AC/DC current clamp is highly reliable, measures 1A to 1000A and provides accurate current reading without breaking the circuit. This clamp measures both ac and dc current with a large jaw, battery-powered Hall-effect probe that gives access to difficult to reach areas. Compatible with most Fluke multimeters. With soft case.
Fluke i1010 Specifications
Measurement type | Hall sensor |
Nominal current range | 600 A, AC 1000 A, DC. |
Continuous current range | 1 A - 600 A, AC 1 A - 1000 A, DC. |
Maximum non-desctructive current | 1000 A. |
Lowest measureable current | 0.5 A. |
Basic accuracy | 2% + 0.5 A (% reading + floorspec). |
Useable frequency | DC - 10 kHz. |
Output level(s) | 1 mV/A. |
Zero error adjustment | Yes. |
Safety Specifications | |
Safety | CAT III, 600 V. |
Maximum voltage | 600 V. |
Mechanical and General Specifications | |
Warranty | 1 year. |
Battery life | 9 V, 60 h. |
Maximum conductor diameter | 30 mm 2 x 25 mm. |
Output cable length | 1.6 m. |
Shrouded banana plugs | Yes. |
No customer reviews for the moment.
10 other products in the same category:
arrow_upward