loading spinner
Fluke 368 FC True-rms Leakage Current Clamp Meter
  • Fluke 368 FC True-rms Leakage Current Clamp Meter
  • Fluke 368 FC True-rms Leakage Current Clamp Meter
  • Fluke 368 FC True-rms Leakage Current Clamp Meter

Fluke 368 FC True-rms Leakage Current Clamp Meter

Fluke authorised distributor and calibration house.

Includes: Fluke 368FC Leakage Clamp Meter, Soft case, Safety manual, 2x AA batteries.

4709907
£499.00
£598.8 Inc. VAT
In Stock

The Fluke 360 Series of true-rms leakage current clamp meters help users detect, document, record and compare leakage current readings over time as a means of preventing unplanned downtime, and identifying intermittent GFCI and RCD trips, without taking equipment off line. The Fluke 368 FC has large diameter jaws (40 mm) for work with larger conductors. The clamp’s jaw is fully shielded to accurately capture very small leakage signals, and to minimize external electromagnetic interference.

The Fluke 368 FC offers wireless data connectivity via Fluke Connect. As part of Fluke Connect—the industry’s largest system of software and more than 40 wireless test tools—the 368 FC and 369 FC allow you to track changes in leakage current over time, helping to identify potential problems before they turn into major failures.

The Fluke 368 FC Leakage Current Clamp, part of the Fluke Connect system of wireless test tools, help industrial electricians and maintenance technicians identify, document, record, and compare leakage current readings to help prevent problems before they happen, without shutting down critical equipment.

FEATURES

True-rms measurements for accuracy when measuring complex, non-sinusoidal waveforms.
40 mm jaw.
Highest resolution of 1 μA, measure up to 60 A.
Selectable filter function eliminates unwanted noise.
Max/Min/Average readings and hold function.
Forward-facing LED worklight for use in dark wiring cabinets.
Backlit display; auto backlight off and auto power off for extended battery life.
CAT III 600 V safety rating.

Fluke 368 Specifications
Measurement Function AC (alternating current).
AC Current Range(s) 3 mA, 30 mA, 300 mA, 3 A, 30 A, 60 A.
mA/A: manual selection
3 mA/30 mA/300 mA: automatic selection
3 A/30 A/60 A: automatic selection.
Range/Resolution 3 mA¹/0.001 mA.
30 mA/0.01 mA.
300 mA/0.1 mA.
3 A/0.001 A.
30 A/0.01 A.
60 A/0.1 A.
Accuracy - Filter Activated (40 to 70Hz), Filter Off (40 to 1kHz) 3 mA to 30 A: ±1% + 5 digits.
60 A: 2% + 5 digits.
Frequency 40 Hz to 1 kHz.
Crest Factor 3.
¹The minimum value is 10 μA rms.
General Specifications
Display (LCD) Digital readout: 3300 count.
Display Refresh Rate 4 times/sec.
Maximum Conductor Diameter 40 mm.
Battery 2AA, IEC LR6, NEDA 15A, alkaline.
Battery Life More than 150 hours (without backlight and spotlight).
Automatic Shutdown After 15 minutes of inactivity.
Safety and Environmental Specifications
General Safety IEC 61010-1: Pollution Degree 2.
Measurement Safety IEC 61010-2-032: CAT III 600V, CAT IV 300V.
Operating Temperature -10 to +50°C.
Storage Temperature -40 to +60°C.
Operating Humidity Non-condensing (<10°C).
90% relative humidity (10 to 30°C).
75% relative humidity (30 to 40°C).
45% relative humidity (40 to 50°C).
Protection Class IEC 61557-13: Class 2, ≤30A/m.
Dimensions 234 x 101 x 46 mm.
Weight 500 g.
Fluke 368 FC warranty 3 years.

Download

Fluke 368 + 369FC Datasheet

PDF Specifications of the Fluke 368FC & Fluke 369FC Clamps.

Download (1.81M)

No customer reviews for the moment.

Write your review

Fluke 368 FC True-rms Leakage Current Clamp Meter

16 other products in the same category:

arrow_upward