- Hamilton01698 829711
- Leeds0113 235 1356
- Belfast02890 830302
Megger DCM340 Digital Clampmeter
Includes: Megger DCM340 Clamp Meter, Batteries, Pouch and Test leads.
The Megger DCM340 is designed to be used on electrical systems and equipment where there is a need to measure current, volts, resistance and frequency. It is therefore intended for use while installing, maintaining, fault-finding or monitoring those systems.
Current measurement combined with the comprehensive and accurate multimeter functions of the DCM340 eliminate the need to carry around both a clampmeter and multimeter - this instrument does it all. The Megger DCM340 Clamp Meter is safety rated to IEC 61010-1 Cat III 600 V, and is drop-tested to 1.2 m onto a hard floor.
FEATURES
600 A and 600 V.
Resistance and continuity.
High resolution digital bargraph.
Peak, min/max and data-hold functions.
Zero-offset REL mode for comparative measurements.
IEC61010 CAT III 600 V.
Megger DCM340 Specifications
AC Current | Accuracy (50/60 Hz) | Accuracy (61 - 400 Hz) |
---|---|---|
0 - 60 A | ±1.9% ± 7 digits | ±2.5% ± 7 digits. |
60 - 400 A | ± 1.9% ± 5 digits | ± 2.5% ± 5 digits. |
400 - 600 A | ± 2.5% ± 5 digits | ± 2.9% ± 5 digits. |
DC Current | Accuracy | |
0 - 60 A | ± 1.5% ± 10 digits. | |
60 - 400 A | ± 1.9% ± 5 digits. | |
400 - 600 A | ± 1.9% ± 10 digits. | |
Voltage | Accuracy (50 - 500 Hz) | Accuracy (DC) |
0 - 400 V | ± 1.0% ± 5 digits | ± 0.7% ± 2 digits. |
400 - 600 V | ± 1.0% ± 5 digits | ± 0.7% ± 2 digits. |
Input Impedance | 1 MΩ // <100 pF. | |
Resistance and Continuity | Accuracy | |
0 - 400 Ω | ± 1% ± 3 digits. | |
Open Circuit Voltage | 3 V. | |
Continuity Check | Beeper sounds @ <30 Ω. | |
Frequency | Resolution/Range | Accuracy |
20- 400 Hz | 1 Hz | ± 0.1% ± 2 digits. |
Sensitivity | 3 A. | |
Peak Hold | ±3% ± 15 digits. | |
Sample Time | 10 ms. | |
MIN/MAX Hold | Add 15 digits to accuracy for AC and DC. | |
Positional Error | ±1% of reading. | |
Overload Protection | 600 V and 600 A rms. | |
AC Conversion | Average sensing rms indication calibrated to the rms value of a sine wave input. | |
Auto Power Off | 30 minutes after power on. | |
LCD | ||
Display | 3½ digit large-scale readout. | |
Count | 4000. | |
Sample rate | 1.5 per second. | |
Overrange | "OL". | |
General Specifications | ||
Battery | 1 x 9V PP3 MN1604 6LR61 alkaline cell. | |
Battery life | 200 hours (alkaline). | |
Operating temperature | 0°C - 30°C <80% Rh 30°C - 40°C <75% Rh 400°C - 50°C <45% Rh. |
|
Overvoltage safety category | IEC 61010-1 600V CAT III. | |
Jaw size/maximum conductor | 35 mm diameter. | |
Dimensions | 68 mm (W) x 237 mm (H) x 42 mm (D). | |
Weight | 225 g including batteries. | |
Megger DCM340 warranty | One-year. |
No customer reviews for the moment.
COMPONENT |
DESCRIPTION | PART No. | ||
Unfused Lead Set | Test lead set - comprising of two unfused leads (Red/Black), with right-angle plugs, long and short prods and croc clips (boxed).. | 1002-001B | ||
Fused lead Set | Fused test lead set, (Red/Black). Red FF500mA, 50kA (boxed). | 1002-015B |
16 other products in the same category:
arrow_upward