- Hamilton01698 829711
- Leeds0113 235 1356
- Belfast02890 830302
Seaward Sentinel 501 Electrical Safety Tester
Includes: Clare Sentinel 501 User Manual, test lead set (hv cables x 2), interlock key, remote terminal plug, power lead, Test Lead Set (Earth Bond Cables x 2).
The Clare Sentinel 501 electrical safety tester (manufactured by Seaward) enables manufacturers to check their products in-house to ensure compliance with the relevant international technical conformance standards. Significant time and cost saving benefits are provided by the Sentinel 501 bench-top Hipot/flash tester from Clare, which deliver improved type testing during product development or enhanced compliance testing in a laboratory environment.
A remote start terminal and signal I/O port allows for remote starting, safety interlocking and PLC control while an enhanced safety feature will automatically cut off the output voltage within 150µs where normal output voltages are detected or when the upper or lower current trip limits are reached while the device is under test.
The Sentinel series is ideal for R&D facilities and compliance laboratories, while design, quality assurance, and manufacturing and production engineers will also benefit from the easy-to-use safety test features.
SENTINEL SERIES KEY FEATURES
500 VA capability (Sentinel 500 series).
Earth bond / insulation resistance (Sentinel 501).
Sweep function for test analysis.
Flexible / high resolution test parameters .
Manual / automatic test modes.
Remote and PLC control.
Fast cut off and automatic discharge.
Features | 200 | 500 | 501 |
---|---|---|---|
Earth/ground Bond | |||
AC dielectric strength - 5 kV | |||
DC dielectric strength - 6 kV | |||
DC insulation resistance | |||
200 VA (40 mA) | |||
500 VA (100 mA) | |||
ARC detection |
AC Dielectric Strength | ||
Programmable Voltage Range | 0.100 kV - 5.000 kV (2V/Step Resolution). | |
Frequency Independent of Supply | 50 or 60 Hz Selectable. | |
Output Voltage Accuracy | ±1% + 5 Volts (No Load). | |
Voltage Display Resolution | 0.001 kV. | |
Current Measurement | 0.001 mA - 100.0 mA. | |
Range and Accuracy | ±1.5% + 30 Counts when trip limit <1.11mA ±1.5% ± 3 Counts when trip limit >1.11mA. |
|
Current Display Resolution | 0.001 mA / 0.001 mA / 0.1 mA. | |
Selectable Range of Pass/Fail Levels | 0.001 mA - 100.00 mA. | |
Maximum Rated Current | 100 mA (0.5 kV ≤ V ≤ 5 kV) 10 mA (0.1 kV ≤ V ≤ 0.5 kV). |
|
Arc Detection | Yes. | |
Ramp time | 0.1 - 999.9s. | |
Test Time | Off / 0.5s - 999.9s. | |
DC Dielectric Strength | ||
Programmable Voltage Range | 0.100 kV - 6.000 kV (2V/Step Resolution). |
|
Frequency Independent 50 or 60 Hz Selectable of Supply | 50 or 60 Hz Selectable. | |
Output Voltage Accuracy | ±1% + 5 Volts (No Load). | |
Voltage Display Resolution | 0.001 kV. | |
Current Measurement | 0.001 mA - 20.0 mA. | |
Range and Accuracy | ±1.5% + 30 Counts when trip limit <1.11 mA ±1.5% + 3 Counts when trip limit >1.11 mA. |
|
Current Display Resolution | 0.001 mA / 0.001 mA / 0.1 mA. | |
Selectable Range of Pass/Fail Levels | 0.001 mA - 20.00 mA. | |
Maximum Rated Current | 20 mA (0.5 kV ≤ V ≤ 5 kV) 2 mA (0.1 kV ≤ V ≤ 0.5 kV). |
|
Arc Detection | Yes. | |
Ramp time | 0.1 - 999.9s. | |
Test Time | Off / 0.5s - 999.9s. | |
Earth Bond | ||
Programmable Test Current | 03.00 A - 32.00 A ac. | |
Test Current Resolution | 0.01 A. | |
Test Current Accuracy | 3 A - 8 A: (1% of rdg+0.2 A) 8 A - 32 A: (1% of rdg+0.05 A). |
|
Test Voltage | 6 V AC max (open circuit). | |
Test Voltage Frequency | 50 Hz/60 Hz selectable. | |
Resistance Measurement Range | 10mΩ - 650.0 mΩ. | |
Resistance Measurement Resolution | 0.1 mΩ. | |
Resistance Measurement Accuracy | (1% of rdg + 2 mΩ). | |
Test Time | 0.5 - 999.9s. | |
Arc Detection | Yes. | |
Insulation Resistance | ||
Output Voltage | 50 V - 1000 V. | |
Output-Voltage Resolution | 50 V / Step. | |
Output-Voltage Accuracy | ±(1% of setting +5 V)[no load]. | |
Resistance Measurement Range | 0.001 GΩ -50.00 GΩ. | |
Test Voltage | ||
50 V - 450 V | 0.001 - 0.050 GΩ 0.001 - 0.500 GΩ. |
|
500 V - 1000 V | 0.051 - 2.000 GΩ 0.501 - 9.999 GΩ 10.00 - 50.00 GΩ. |
|
Selectable Range of Pass/Fail Levels | 0.001 mA - 20.00 mA. | |
Output Impedance | Yes. | |
RAMP (Ramp-Up Time) | 600 kΩ. | |
TIMER (Test Time) | 1s~999.9s. | |
General Specifications | ||
Dimensions | 330W x 148H x 587D mm. | |
Weight | Approx 27 kg. | |
Sentinel 501 warranty | 1 year (subject to product registration with Seaward). |
No customer reviews for the moment.