loading spinner
Kikusui TOS5200 Withstanding Voltage Tester
  • Kikusui TOS5200 Withstanding Voltage Tester
  • Kikusui TOS5200 Flash Tester

Kikusui TOS5200 Withstanding Voltage Tester

kikusui approved distributor

Includes: Power cord, High-voltage test lead, SIGNAL I/O plug, High-voltage warning sticker, Setup Guide, Quick Reference, Safety Information, CD-ROM.

TOS5200

The Kikusui TOS5200 Withstanding Voltage Tester performs withstanding voltage tests, which is one of the four types of tests that are required for ensuring the safety of electrical products. It can perform AC withstanding voltage tests on electrical products and electrical components in accordance with the requirements of safety and electrical standards and ordinances such as IEC, EN, UL, VDE, and JIS.

Equipped with the PWM amplifier, the TOS5200 can provide a stable & reliable output without being affected by ACpower line. Therefore, it is a perfect solution for electronic equipment or devices complied to IEC, EN, UL, VDE andJIS etc. requirement.

The PWM amp system provides highly-stable output, 5kV/100mA (500VA) AC Hipot (withstanding voltage) test, High-precision measurement ±1.5% of reading (with voltmeter 500V or higher, Ammeter 1mA or higher), Rise time/Fall time control, Key lock function and Protection cover for key operation. Equipped with RS-232C / USB interface.

FEATURES

Rise/Fall Time control function of the applied voltage.
Highly stable output.
High Precision High Resolution.
Reducing the tact time.
Supporting the World-wide input voltage.

The TOS5200 is not affected by AC line interference. Because the output voltage is maintained at a fixed value even if the AC line voltage or frequency changes, stable tests can be performed even in locations where the power supply is unstable.

Kikusui TOS5200 Specifications
AC Output Section
Output Range 0.05 kV to 5.00 kV.
Output Accuracy ±(2 % of set + 20V) when no load is connected.
Operating Range 0.00 kV to 5.50 kV.
Resolution 10 V steps.
Max. Rated Output 500 VA.
Max. Rated Voltage 5 kV.
Max. Rated Current 100 mA (when the output voltage is 0.5 kV or greater).
Transformer Rating 500 VA.
Output Voltage Waveform Sine
Distortion: If the output voltage is 0.5 kV or more: 3 % or less.
Frequency 50 Hz or 60 Hz.
Accuracy ±0.5 %.
Voltage Regulation 10 % or less.
Input Voltage Variation ±0.3%.
Short-Circuit Current 200 mA or more.
Output Method PWM switching.
General Specifications
Display LCD: LED back custom indicators.
Installation location Indoors, at a height of up to 2000 m.
Operating Temperature Range 0 °C to 40 °C (32 °F to 104 °F).
Voltage Range 100 VAC to 240 VAC (90 VAC to 250 VAC).
Earth continuity 25 AAC, 0.1 Ω or less.
Dimensions 320 (12.6") (330(12.99")) W × 132(5.2") (150(5.91")) H × 350(13.78") (420(16.54")) D.
Weight Approx. 14 kg (30.9 lb.).
TOS5200 warranty One-year.

Download

Kikusui TOS5200 Datasheet

PDF specifications of the Kikusui TOS5200 AC Hipot Tester.

Download (1.29M)

No customer reviews for the moment.

Write your review

Kikusui TOS5200 Withstanding Voltage Tester
COMPONENT
DESCRIPTION PART No.
1.5m Test Leads High-voltage test lead for TOS53XX, 1.5m (5kV Max.). TL31-TOS
3m Test leads High-voltage test lead for TOS53XX, 3m (5kV Max.). TL32-TOS
Probe High-voltage test probe, Cable Length 3.5m (AC4kV,DC5kV Max.), Note: The optional Adapter DD-5P/9P (DIN to Mini DIN) is required
for the connection with TOS53XX,TOHP01A-TOS
Control Box Remote control box (For one hand operation, cable length:1.5m) Note1: The optional Adapter DD-5P/6P (DIN to Mini DIN) is required
for the connection with TOS7200, Note2: The optional Adapter DD-5P/9P (DIN to Mini DIN) is required for the connection with TOS53XX,TOS93XX.
RC01-TOS

15 other products in the same category:

arrow_upward