Martindale Electric, founded in 1928, also owns the Edgcumbe Instruments Metrohm products, as well as the John Drummond Engineers range of test lamps. Martindale are a British owned company.
LOK6 is a lock off device for individual Red Spot style and other similiar style fuse holder bases, after removal of the fuse carrier.
The Martindale PSUHPAT12 is a 12v power supply suitable for use in a car/van cigarette lighter.
The G Clamps clamp-on facility eliminates the need to drill the bus bar.
Heavy duty earth bond lead with single 4mm banana plug connection.
The VT7 is a single pole contact voltage indicator which detects AC voltages of 50V-600V with bright LED indication.
The MP25 in-line fuse holder is part of a range of fused test leads produced under the John Drummond brand by Martindale Electric, intended for use by professional electricians.
The Martindale PSUPD230 12V power supply for use with the PD430, PD440, PD690 & PD700 proving units.
Earth bond lead with XLR style connector.
Incorporates a unique built-in proving device to continuously self check the tester is correctly functioning.
The DRUMMOND G Clamp is a moulded insulated clamp-on connector designed to provide a direct connection to a rigid rectangular bus bar.
Ideal for maintenance applications where lamps can be checked before attempting to access difficult locations for lamp replacement.
The Martindale CP201 is an industrial version of the classic check plug, fitted with a 250V 16A plug (BS 4343 / IEC309).
Any result other than 3 indicators lit on the CP301 shows a fault condition.
The Martindale VI13800 contact voltage indicator offers the same specification as the older VI13700/G model except the fuse has been removed.
Extension accessory for the Martindale DC50 borescope.
The John Drummond MTL10 gives safe indication of voltage between 50V and 500V AC and 50V to 750V DC.
A proving unit is essential for the proving of voltage indicators before and after use, in order to follow safe electrical working practices.
The Martindale CM51A is a pocket sized clamp meter which reads AC current up to 300A.
Works on most domestic and industrial distribution boards and provides a safe way of isolating the supply.
Widely specified by electrical utilities and other safety conscious organisations, the Drummond MTL10 and MTL20 both come complete with a 2 year warranty.